Flanged Sliding Ball Check Valve
| | | Brief introduction: Sliding ball type check valves disc is a ball coated with rubber and dependant on the line pressure .The ball can slide up and down in the integrated chute in the body to open or close the valves without any noise and water-hammering and good sealing capability. The bore is full without any block so the flow rate is much with little resisting force and little pressure loss and water-head loss is 50% of swing check valves. It can be installed vertically or horizontally and widely used in cold water's, hot water's, industry's and sewage's pipeline and it is more for sewage submersible pump. Mail part & material Body: Cast iron, ductile cast iron Bonnet: Cast iron, ductile cast iron Ball: cast iron coated with rubber Technical Specification Nominal pressure: 1.0-1.6MPa Nominal diameter: 50-350mm Medium: water and weak corrosive fluid Working temperature: 0-80℃ Flanged end: GB/T17241.6 GB9113 Inspection and test: GB/T 13927 API 598 Main external and connection dimension

DN | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | L | 180 | 200 | 260 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | H | 185 | 210 | 245 | 280 | 335 | 400 | 495 | 600 | 715 | 820 | | |