Welcome Customer !

Membership

Wuhan Huatian Electric Power Automation CO., LTD
Free Member ·1YRS
,
Other

Main Products: 电力试验设备

Xwboo>Products

HTCJ-V Lightning Impulse Voltage Generator Test Equipment

Model
Nature of the Manufacturer
Other
Product Category
Three、High voltage insulation equipment
Place of Origin
City, Province
Overview
Constant current charging automatic control technology is adopted Easy to adjust wave, easy to operate, good synchronization performance, reliable operation The loop inductance is small, the load capacity is big
Product Details

Product Introduction

Impulse voltage generator is mainly used for impulse voltage test of power equipment, such as lightning impulse voltage full wave, lightning impulse voltage truncation wave and operating impulse voltage wave, to test insulation performance.Impulse voltage generator a power supply device that imitates impulse voltages such as lightning and operating overvoltages.It is mainly used in insulation shock withstand voltage and dielectric shock breakdown and discharge tests.

Scope of application: standard lightning shock, lightning cut-off wave for transformers, reactors, mutual transformers and other high voltage electrical appliances, high voltage thyristor valve SVC(HVDC), power cables, all kinds of high voltage insulators, bushing, operation shock and all kinds of non-standard shock wave impulse voltage test required by users.Various test waveforms (standard and non-standard waveforms, user-generated waveforms) can be generated by a single set of equipment.Field of application: lightning protection and lightning test for quality inspection, measurement, inspection and supervision organizations, power equipment manufacturers, railway communications, aerospace and aerospace vehicles, military research units, universities and meteorological departments.

Product Names:impulse voltage generator, lightning impulse voltage generator test device, lightning impulse current generator, voltage generator test device

Product Parameters

Technical Parameters

Charging voltageSetting range0 ~ 100kV
Scope of work20 ~ 100kV
Setting deviation≤ ±1%
Don't stability≤ ±1%
Setting distinguish0.1kV
Charging timeSetting range30~180s
Setting distinguish1s
Alarm time delay2s
Number of pressureSetting range1~999
Protection settingOvercurrent protection

value

Can be set
Overvoltage protection

value

Can be set
Dynamic charge

protection

Can be set
Trigger pulseMore than 15kV, rising time less than 100ns, polarity can be switched
Output impact stabilityMore than 99%
Note:

1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.

2. For more information about Huatian products, please enter Product center .Service :qiao@hvtest.cc

Product Characteristics

  • 1、The circuit has small inductance and adopts the filter measure with resistance, which can produce standard shock wave under the load of large capacitance and large load capacity。

  • 2、High voltage utilization factor, lightning wave and operating wave are not less than 85% and 80% respectively.

  • 3、Easy to adjust wave, easy to operate, good synchronization performance, reliable operation。

  • 4、Constant current charging automatic control technology, high degree of automation, strong anti-interference ability.