With the software self-calibration function, it avoids the need to open the chassis and adjust the potentiometer to calibrate the precision The main control board adopts DSP+FPGA structure and 16-bit DAC output Connect to laptop (optional) to run
Product Introduction
HT - 1200 Microcomputer relay protection tester is in reference to DL/T624-1997 issued by the ministry of the type of Microcomputer relay protection test device technical conditions, on the basis of widely to listen to your users, summarizes the current domestic similar products strengths and weaknesses, full use of modern advanced microelectronics technology and the implementation of a new type of device miniaturization of Microcomputer relay protection tester.Microcomputer relay protection tester adopts single machine run independently, can also join a laptop running advanced structure.The host adopts DSP+FPGA structure, real 16-bit DAC output, built-in new module-type high-fidelity linear high-power amplifier, 8.4-inch TFT true-color display screen with resolution of 800×600 and industrial The keyboard mouse.WindowsXP operating system, powerful.Small volume and high precision.The Microcomputer relay protection tester has both large tester is superior performance, advanced features, but also has small tester is flexible and convenient operation, high reliability, etc. The high performance price ratio.It is a handy tool for relay insurance workers.
Product names:Microcomputer relay protection tester、Microcomputer relay protector、Relay protection tester、Three-phase relay protection tester、Relay tester、Three successive protection tester、Three - phase relay protection calibrator, relay calibrator, three - phase relay calibrator、The bartender instrument
Product Parameters
Alternating current source
| Amplitude range | 6×(0 ~ 30A)/ phase;Accuracy: 0.5% |
| Output maximum of six phase current in parallel | 180A |
| Long-term permissible operating value of phase current | 10A |
| Power | 300 va/phase |
| Maximum power in six phase parallel connection | 900VA |
| Permissible operating time for maximum output in six phase parallel | 10s |
| Frequency range | 0 ~ 1000 Hz;Accuracy: 0.001 Hz |
| Harmonic frequency | 2 ~ 20 times、Phase: 0 ~ 360°、Accuracy: 0.1 ° |
Direct current source
| amplitude | 20A/phase |
| Power | 300VA/phase |
| Precision | 0.5% |
Ac voltage source
| Amplitude range | 6 x (0 ~ 125 V)、Accuracy: 0.5% |
| Line voltage range | 0~250V |
| Voltage output power | 70VA/100VA |
| Frequency range | 0 ~ 1000 Hz;Accuracy: 0.001 Hz |
| Harmonic frequency | 2 ~ 20 times、Phase: 0 ~ 360°、Accuracy: 0.1 ° |
Dc voltage source
| Phase Voltage output amplitude | 0~±150V |
| Precision | 0.5% |
| Line Voltage output amplitude | 0~±300V |
| Voltage output power | 90VA/180VA |
The switch quantity terminals
| Switch input terminal | 8 pairs |
| The empty contacts | 1 ~ 20mA, 24V Device internal active output |
| Potential flip | 0 ~ 6VDC is low level;15 ~ 250VDC is high level |
| Switch output terminal | 4 pairs, empty contacts, blocking capacity: 110V/2A, 220V/1A |
Time Measuring range
| The scope of | 1ms~9999s |
| Accuracy of measurement | 1ms |
volumeThe weight of the
| volume | 455×530×220mm3 |
| Weight | about 30 kg |
Note: 1.The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice.In case of misappropriation or copying, legal liability will be investigated.
2.For more information about huatian products, please enter Product center .Service :qiao@hvtest.cc
Product Characteristics
- 1、Meet all field test requirements.The Microcomputer relay protection tester is a standard of six phase current, six phase voltage output at the same time, the current a/phase, 30 voltage125V/phase.Six - phase current in parallel up to 180A.It can not only test the traditional relays and protection devices, but also test the modern microcomputer protection, especially the transformer differential protection and backup self-switching device, the test is more convenient and perfect.
- 2、All kinds of technical indexes have reached the standard of DL/ t624-1997 "technical conditions of microcomputer test equipment for relay protection" issued by the ministry of electric power.
- 3、Classic WindowsXP operation interface, man-machine interface friendly, easy and quick to operate;The high-performance embedded industrial control computer and 8.4-inch TFT true-color display with a resolution of 800×600 provide rich and intuitive information, including the current working status of the device and various help information.
- 4、The native Windows XP system with recovery function, to avoid illegal shutdown or misoperation caused by the system crash.
- 5、The device has an ultra-thin industrial The keyboard and a photoelectric mouse that handles everything just like a PC.
- 6、The main control board adopts DSP+FPGA structure and 16-bit DAC output, which can generate high-density sinusoidal wave of 2000 points per week for the basic wave, greatly improving the quality of waveform and improving the precision of tester.
- 7、High-fidelity linear power amplifier ensures the accuracy of small current and the stability of large current.
- 8、The Microcomputer relay protection tester with USB interface and PC communication directly, without any connection, easy to use.
- 9、Connect to laptop (optional) to run.Laptop computer and industrial computer use the same set of software, no need to learn how to operate.
- 10、It is equipped with the independent auxiliary voltage source output, the output voltage is 110V(1A) and 220V(0.6a) respectively.To be used by relays or protective devices that require dc working power.
- 11、With the function of software self-calibration, it avoids the need to open the chassis and adjust the potentiometer to calibrate the precision, thus greatly improving the stability of the precision.
The product video Product Video