Welcome Customer !

Membership

Wuhan Huatian Electric Power Automation CO., LTD
Free Member ·1YRS
,
Other

Main Products: 电力试验设备

Xwboo>Products

HTCT-200 Transformer Ratio Polarity Tester

Model
Nature of the Manufacturer
Other
Product Category
Six、Relay Protection and Secondary Circuit Test Instrument
Place of Origin
City, Province
Overview
Adopt voltage measurement method and constant voltage source The polarity of the transformer is measured electronically Suitable for all current transformers ranging from tens of amperes to tens of thousands of amperes, all electromagnetic voltage transformers
Product Details

Product Introduction

Transformer ratio polarity tester. According to jjg313-94 current transformer for measurement and jjg313-93 voltage transformer for measurement, on-site ratio test must be conducted during transformer handover and after winding replacement.

The inspection method of the transformer's change ratio is the current method, which is easy to understand and feasible in principle. However, with the increase of system capacity, the primary current of the current transformer becomes larger and larger, up to tens of thousands of amperes.Site to hundreds of ampere current existing difficulties, thousands or tens of thousands of ampere ampere is almost impossible, and large volume, weight weighs several hundred kilograms or several tons, field use more difficult, such as the low current method, due to current transformer magnetic sensitivity, linearity, impedance, the influence of leakage reactance can make current transformer error jump, lost the meaning of change than check.

The transformer transformer ratio tester is small in volume, light in weight, wide in measuring range and easy to carry.The htct-200 transformer ratio polarity tester is developed by our company by summarizing the characteristics of transformers at home and abroad, applying the new research theories and results, and combining the requirements of field use.

The product names:Transformer ratio polarity tester, transformer ratio polarity tester

Product parametersProduct Parameters

Technical parameters

Variable ratio measurement range 5A/5A~25000A/5A 5A/1A~5000A/1A
Electromagnetic type voltage transformer series
Accuracy of measurement 0.2%
volume 280×230×100mm3
The weight of the 3kg
Note:

1.The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice.In case of misappropriation or copying, legal liability will be investigated.

2.For more information about huatian products, please enter Product center .Service :qiao@hvtest.cc

Product Characteristics

  • 1、Using voltage measurement method, small volume, light weight, portable, meet the field work portability
  • 2、The voltage waveform is generated by the single chip microcomputer program, which is clean and pure and free from power grid interference
  • 3、Internal use of constant pressure source, reading stability
  • 4、The transformer ratio polarity tester is suitable for all current transformers and electromagnetic voltage transformers ranging from tens of amperes to tens of thousands of amperes
  • 5、The transformer variable ratio polarity tester can directly display the variable ratio
  • 6、It is simple and intuitive to measure the polarity of ct by electronic method

The product video Product Video

Similar Product Recommend