Used for testing current transformer Used in various tests of voltage transformer It is used for voltage transformer excitation characteristic test, PT turns ratio test, PT polarity check and other tests
Product Introduction
Transformer Tester is new product created after widely adopt customers’ advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARM,advanced manufacturing technology ensure a stable and reliable product performance, full-featured, high degree of automation, high efficiency, in the domestic leading level, they are the professional testing equipments for transformer check in power industry.
Product names:CT parameter analyzer, CT analyzer, frequency CT analyzer, CTPT analyzer, transformer tester, frequency transformer characteristic tester, transformer transient characteristic analyzer, current transformer tester, CT characteristics analyzer, current transformer, current transformer parameters analyzer features analyzer, CT parameter tester, tester, current transformer, current transformer parameters characteristics tester, Comprehensive instrument for the transformer
Product Parameters
The main parameters
| Usage | Protection CT, protection PT |
| Output | 0~180Vrms,12Arms,18A(Peak) |
| Voltage measurement accuracy | ±0.2% |
| CT ratio | Range:1~40000 |
| accuracy:±0.2% |
| PT ratio | Range:1~40000 |
| accuracy:±0.2% |
| Phase | The resolution of the:0.5min |
| accuracy:±5min |
| DC resistance | Range:0~300Ω |
| accuracy:2%±2mΩ |
| Burden | Range:0~1000VA |
| accuracy:2%±0.2VA |
| power supply | AC220V±10%,50Hz |
| Working environment | Temperature: -10℃ ~ 50℃, humidity: ≤90% |
| Dimensions and weight | size:340mm×300mm×150m,The weight of the:≤9kg |
Note: 1.The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice.In case of misappropriation or copying, legal liability will be investigated.
2.For more information about huatian products, please enter Product center .Service :qiao@hvtest.cc
Product Characteristics
- 1、Full-featured, not only satisfy the test requirements of various CTs(include TP class), such as the excitation characteristics (i.e., volt-amperecharacteristics), ratio, polarity, secondary winding resistance, secondaryburden, ratio error and phase displacement, but can also be used for the testsof various PTs, including excitation characteristics of the electromagnetic unit,ratio, polarity, secondary winding resistance, ratio error and phasedisplacement.
- 2、 Automatically give CT, VT parameters, including knee point voltage /current, 10% error curve, the accuracy limit factor (ALF), instrument securityfactor (FS), the second time constant (Ts), remanence coefficient (Kr),saturated and unsaturated inductance etc.
- 3、Test meet IEC60044 GB1208 (-1) GB16847 (IEC60044-6) became etcall kinds of transformer standards, and in accordance with the transformertypes and levels of automatic choose which standard test.
- 4、Based on the advanced low-frequency method to test principle of, it can deal with CT test with inflection point up to 30kV.
- 5、Interface friendly and beautiful, Chinese graphics interface.
- 6、The device can store 2000 sets of test data without loss when power is lost.After the test, use U disk to store it on the PC, analyze the data with the software, and generate WORD report.
- 7、The test is simple and convenient. The direct resistance, excitation, ratio change and polarity tests of CT are completed with one key. Besides the load test, all other tests of CT adopt the same wiring mode.
- 8、The weight of The device is easy to carry.9 kg.
The product video Product Video