Welcome Customer !

Membership

Wuhan Huatian Electric Power Automation CO., LTD
Free Member ·1YRS
,
Other

Main Products: 电力试验设备

Xwboo>Products

SMG2000B Double Clamps Digital Phase Meter

Model
Nature of the Manufacturer
Other
Product Category
Six、Relay Protection and Secondary Circuit Test Instrument
Place of Origin
City, Province
Overview
Tongs type current transformer input measured current and protection function by conversion mode High contrast Liquid crystal display, words up to 25mm, The screen Angle can be freely converted about 70° Pressure resisting function, edge breaking function
Product Details

Product Introduction

Phase voltammeter is a high-precision, low-price, hand-held, two-channel input measurement instrument designed for voltage, current and Phase measurement in the field.Using this meter, the phase between u-u, i-i and u-i can be easily measured in the field, the phase sequence of sensitive and capacitive circuits and three-phase voltage can be distinguished, the wiring group of transformers can be detected, the secondary circuit and bus differential protection system can be tested, the phase relationship between CT of each differential protection group can be read out, and the wiring of the electricity meter can be checked.The tongs current transformer is used to input the measured current, so there is no need to disconnect the measured line.When measuring the phase between u1-u2, the two input circuits are completely insulated and isolated, so it completely avoids the possible short-circuit of the measured circuit caused by wrong wiring, and thus burns out the measuring instrument.The display screen USES high-contrast Liquid crystal display with words up to 25mm and The screen Angle can be freely converted to about 70° for best visual effect.

Phase voltammeter shell USES engineering insulation materials, another rubber vibration protection sleeve, safe and reliable.

Product names:Phase meter、Double clamp phase table、Double clamp Phase voltammeter、Clamp phase table、Clip - on Phase voltammeter, Digital double clamp phase meter, Digital double clamp phase meter, Low-voltage volt-ampere phase meter, Hand-held digital double clamp Phase voltammeter Double clamp digital phase meter, Double clamp digital phase meter, Double-clamp voltage-ampere phase meter, Double clamp voltage-ampere phase meter, Digital display Phase meter, Phase voltammeter

Product parametersProduct Parameters

Reference to working conditions

Environment temperature (23±5)℃
Environmental humidity (45~75)% RH
Measured signal waveform Sine wave、β=0.02
Measured signal frequency (50±0.2)Hz
The position of the measured current-

carrying conductor at the clamp mouth

any
The amplitude of The measured signal when

measuring The phase

100~220V、0.5~1.5A
External reference frequency electromagnetic

field interference

Should be avoided

Measurement error of AC voltage

Limit of quantity Resolution Basic error limit
20V 0.01V ±(1.2%RD+2)
200V 0.1V±(1.0%RD+2)
500V 1V±(1.2%RD+2)

Rated working condition

Environment temperature (0~40)℃
Environmental humidity (20~80)% RH
Measured signal waveform Sine wave、β=0.05
Measured signal frequency (50±0.5)Hz
The position of the measured current-

carrying conductor at the clamp mouth

any
The amplitude of The measured signal when

measuring The phase

U1-U2 phase:30V~500V
I1-I2 phase:10mA~10.00A
U1-I2 phase or I1-U2 phase:10V~500V、10mA~10.00A
External reference frequency electromagnetic

field interference

Should be avoided
Limit of rated operating error Under the above rated working conditions, the rated working error limit of each measured shall not exceed twice the corresponding basic error limit

Power frequency phase measuring error (U1, U2 measuring phase voltage input circuit impedance: 40 k Ω)

Range Resolution Basic error limit
0~360° 1° ±3°

Other technical features

Display digit Three and a half
Sampling rate 3 times per second
The power supply Single 9V laminated battery, The power supply current is less than 5mA
Overall dimensions Case size 192×95×55mm3
Clamp shell size 140×42×20mm3
Jaw size Φ7mm×9mm
Weight Body 280g
Test forceps 2×200g
Storage conditions The temperature -10℃~50℃
Note:

1.The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice.In case of misappropriation or copying, legal liability will be investigated.

2.For more information about huatian products, please enter Product center .Service :qiao@hvtest.cc

Product Characteristics

  • 1、Voltage withstand: the 1min test of Sine wave ac voltage of 500V/50Hz between the input end of voltage and the case, the iron core of the current transformer (current clamp), the clamp handle and the secondary side winding coil can withstand 1000V/50Hz, and the input end of the two voltages can withstand 500V/50Hz
  • 2、Insulation resistance: digital double clamp Phase voltammeter between lines and shell, two voltage input: 10 m Ω or greater

The product video Product Video

Similar Product Recommend