Welcome Customer !

Membership

Wuhan Huatian Electric Power Automation CO., LTD
Free Member ·1YRS
,
Other

Main Products: 电力试验设备

Xwboo>Products

ETCR2000 Clamp Type Earth Resistance Tester

Model
Nature of the Manufacturer
Other
Product Category
Thirteen、Ground/Insulation Resistance Test Series
Place of Origin
City, Province
Overview
There are long pliers and round pliers. Able to measure leakage current and neutral current of grounding system. Can be used in the corresponding flammable and explosive environment.
Product Details

Product Introduction

ETCR2000 Clamp Type Earth Resistance Tester is a major breakthrough in the traditional grounding resistance measurement technology, which is widely used in the grounding resistance measurement of electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment.

The ETCR2000 Clamp Type Earth Resistance Tester does not need to disconnect the grounding lead and auxiliary electrode when measuring the loaned Ground system, which is safe, fast and easy to use.

ETCR2000 Clamp Type Earth Resistance Tester can measure the Ground fault that cannot be measured by traditional methods, and it can be applied to the situation that cannot be measured by traditional methods, because ETCR2000 Clamp Type Earth Resistance Tester measures the comprehensive value of the resistance of grounding body and the resistance of grounding lead.

In addition, the C - type clamp ground resistance meter can also measure the leakage current and neutral current of the ground system.

Product nickname:Single jaw grounding resistance tester, nipper plier type grounding resistance tester, grounding resistance meter, pliers grounding resistance meter, clip-on grounding resistance meter, clip-on grounding resistance meter, grounding resistance, surface, grounding resistance tester, grounding resistance tester, grounding resistance measuring instrument, clamp type digital grounding resistance tester, grounding resistance tester, pincer pliers type grounding resistance measuring instrument

Product Parameters

Technical parameter

power supply 6VDC(4 no.5 alkaline dry batteries)
operating temperature -10℃-55℃
Relative humidity 10%-90%
LCD 4-digit LCD digital display, length and width 47×28.5mm
clamp table weight (including battery) 1130g
clamp table size length 275mm, width 85mm, thickness 56mm
protection level double insulation
structure characteristics clamping mode
range shift Automatic
external magnetic field <40A/m
External electric field <1V/m
single measurement time 1 SEC
resistance measurement frequency >1KHz
highest resolution resistance measurement 0.001Ω
Resistance measurement range 0.01-1000Ω
* current measurement range 0-30A(type C)
measured current frequency 50/60Hz
stored measurement data 99units
setting range of resistance alarm critical value 1-199Ω
* setting range of current alarm critical value 1-499mA(type C)
Note:

1.The appearance of the product shall be subject to the actual product,Technical parameters with model if there are any changes,without notice.In case of misappropriation or copying, legal liability will be investigated.

2. For more information about huatian products, please enter product center .Service :qiao@hvtest.cc

Product Characteristics Product Characteristics

  • 1、Adopt advanced algorithm and digital integrated processing technology.
  • 2、Start the machine without waiting for self-check, and immediately enter the test.
  • 3、Breaking through the product bulky problem, more in line with the characteristics of handheld instrument.
  • 4、New appearance design, panel 6 key operation, performance through.
  • 5、The function of sound and light alarm and interference signal identification and indication are added.
  • 6、Measurement range increased to 0.01 Ω Ω - 1000, 99 groups of data will be stored, lower power consumption, the largest launch, working current is less than 50mA.

Product Video

Similar Product Recommend