MTW European Type Grinding Mill is new product researched and developed by Vipeak based on ordinary European type grinding mill. Because of more advanced idea and more reliable performance, it has been an intelligent key to the mill market. Raw Materials: Feldspar, calcite, limestone, talc, barite, rare earth, marble, bauxite, phosphate ore, iron oxide red, dolomite, granite, bitumite, anthracite, lignite, kaolin, bentonite, gypsum. Application: ......
Introduction
The system consists of grinding mill, separator, air blower, jaw crusher, vibrating feeder, hopper, dust collector, pipe, powder collector, electric cabinet, motors, etc.Big lump materials are crushed to required size by jaw crusher, then elevated to buffering hopper through elevator, after that fed into the mill to be ground. Materials are to be ground between ring and rollers, and move up with the air flow, those particles which cannot pass the separator will fall down and be ground again, while others will be collected as finished product. Air flow passing through separator will go to the air blower for recycling, it's a closed system.
Product Advantages
01
Bevel gear integral drive, improved efficiency
- Adopt bevel gear as a whole for transmission, accurate transmission ratio, sharp reduction in energy loss; compact structure, convenient and quick installation and adjustment, and significantly improved efficiency.
02
Thin oil lubrication for three transmission parts
- The main engine, fan and powder separator are all lubricated with thin oil, without adding oil pump or lubrication station, the main shaft bearing and bevel gear shaft bearing can be lubricated.
03
Frequency conversion powder separator adopted to improve the efficiency
- The frequency conversion type powder separator has high motor efficiency and energy saving, the isolation structure is adopted between the inner cylinder of the powder separator and the mixed gas powder flow, which effectively improves the powder selection efficiency and accuracy.
04
Sufficient supply of spare parts, worry-free operation
- Whose businesses cover production and sales, takes responsibility for every machine produced by ourselves. We can offer customers technical services about products and original spare parts to ensure the worry-free operation.
Product Specification
Model Specification Name | MTW110 | MTW110G | MTW138G | MTW158G | MTW175G | MTW198G | MTW218G |
Quantity of roller (PCS) | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
Inner diameter of ring (mm) | Ф1100 | Ф1100 | Ф1380 | Ф1580 | Ф1750 | Ф1980 | Ф2150 |
Main Mill Rotating speed (rpm) | 120 | 120 | 100 | 88 | 65-85 | 60-75 | 55-66 |
Max. Feeding size(mm) | 25 | 25 | 30 | 30 | 35 | 35 | 40 |
Output fineness (Mesh) | 10-325, the finest 400 |
| Capacity(tph) | 3~10 | 3~10 | 6~20 | 13 | 10~35 | 18 | 20-50 |
Dimension (L×W×H)(mm) | 6186×8041×8640 | 6186×8041×8640 | 7262×10010×10010 | 10200x9100x10100 | 10171×10023×9916 | 12500x9500x11400 | 14300x11153x10351 |
| Weight(t) | 15 | 15 | 25.5 | 39 | 47 | 64 | 96 |
| Model | Main mill (KW) | Classifier (KW) | Blower (KW) | Bucket elevator (KW) | Jaw crusher/ hammer crusher | Feeder |
| Model | Power (KW) | Model | Power (W) |
| MTW110 | 55 | 7.5 | 55 | 3 | PE250×400 | 15 | GZ2F | 0.15 |
| MTW110G | 55 | 7.5 | 55 | 3 | PE250×400 | 15 | GZ2F | 0.15 |
| MTW138G | 90 | 18.5 | 110 | 4 | PE250×750 | 22 | GZ3F | 0.2 |
| MTW158G | 132 | 22 | 132 | 4 | PE250×750 | 22 | GZ3F | 0.2 |
| MTW175G | 160 | 30 | 200 | 4 | PE250×750 | 22 | GZ4F | 0.45 |
| MTW198G | 220 | 37 | 250 | 11 | PC1010 | 110 | GZ5F | 0.65 |
| MTW218G | 280 | 55 | 315 | 11 | PC1010 | 110 | GZ5F | 0.65 |