
★ Hydraulic Impact Crusher Product Introduction
Hydraulic impact crusher is a high-efficiency crusher, widely used in cement, asbestos, electricity, glass, chemicals, construction materials, metallurgy and other industrial sectors. It is mainly used for the crushing of limestone, asbestos, slag, coke, coal, and other medium hardness ore with a compressive strength limit of less than 200 MPa and a humidity of less than 9%. It has many advantages such as small volume, simple structure, large crushing ratio, small power consumption, high productivity, uniform product particle size, and the like.
Note: When the material compressive strength is less than 120Mpa, the rotor speed is 350-480r/min; the maximum feed particle size does not exceed the specified upper limit; when the material compressive strength is greater than 120Mpa (such as rivers, rivers, pebbles, hard rocks, etc.) rotor speed For 500-760r/min, the maximum feeding particle size does not exceed 150mm, and the practical rotation speed is determined according to different models and different materials.
★ hydraulic impact crusher technical parameters
| Model / Project | PFY 1250X1050 | PFY 1250X1250 | PFY 1250X1400 | PFY 1310X1050 | PFY 1300X1500 | PFY 1300X2000 | PFY 1400X1500 |
| Rotor diameter mm | 1250 | 1250 | 1250 | 1310 | 1300 | 1300 | 1400 |
| Rotor length mm | 1050 | 1250 | 1400 | 1050 | 1500 | 2000 | 1500 |
| Motor power w | 75-110 | 110-160 | 110-185 | 132-200 | 160-260 | 300-400 | 300-400 |
| The maximum feed size mm | 100-300 | 100-300 | 120-300 | 120-300 | 150-350 | 150-350 | 200-400 |
| Material size mm | ≤40 | ≤40 | ≤40 | ≤40 | ≤40 | ≤40 | ≤40 |
| Production capacity t/h | 60-140 | 80-160 | 80-180 | 70-150 | 100-250 | 200-350 | 250-400 |
| Overall quality (t) | 12.5 | 14.8 | 16.5 | 14.8 | 19 | 25 | 25.8 |
| Spindle speed r/min | 390;530 | 390;530 | 390;530 | 390;530 | 390;530 | 390;530 | 350;500 |
| Dimensions | Length mm | 2250 | 2250 | 2400 | 2480 | 2500 | 2550 | 2650 |
| Width mm | 2150 | 2300 | 2600 | 2150 | 2700 | 3100 | 2780 |
| High mm | 2500 | 2500 | 2500 | 2600 | 2680 | 2880 | 2980 |
| Note | The determination of the production capacity in the table is based on the following conditions: a. Broken minerals with a density of 1.6 t/m3 and compressive strength ≤ 160 MPa (natural state); b. surface moisture <2%; c. Continuously and evenly feed the entire length of the rotor. |