HEPMP-B series for lifting steel plate
The series EP magnets are used for lifting single piece of thin steel sheet of below 6mm thickness, These magnets can generate 12kg/cm² lifting force, furthermore it will not lift the second piece steel sheet.
electro permanent magnet sheet Lifter Features:
1)Electrical power is only required when cycling from Magnetize to Demagnetize.
2)Cycle time is 1-3 seconds depending on the size of the system.
3)No battery back-up required
4)No heat is generated since the power is not constantly applied.
5)Variable magnetic power for the handling of thin sheets of steel.
6)Magnetic lifting provides the ability to lift plates without the use of dunnage.
7)Anti-Demag feature to prevent the demagnetize cycle during the lift.
8)All lifters are tested to 3 X the safe working load.
9)Permanent-Electro Technology requires no moving in the magnetic modules.

Main technical parameters | Model | Rated lifting capacity(kg) | Max.pull-off strength(kg) | Overall dimension(mm) | weight(kg) |
| A | B | H | D | n | M |
| HEPMP-100B | 100 | 600 | 350 | 106 | 49 | 45 | 3 | 6 | 15 |
| HEPMP-200B | 200 | 1200 | 350 | 162 | 49 | 45 | 3 | 6 | 22 |
| HEPMP-300B | 300 | 1850 | 500 | 162 | 49 | 45 | 3 | 6 | 30 |
| HEPMP-500B | 500 | 2800 | 500 | 218 | 49 | 60 | 3 | 10 | 40 |
| HEPMP-600B | 600 | 3700 | 650 | 218 | 49 | 60 | 3 | 10 | 50 |
| HEPMP-800B | 800 | 4650 | 500 | 330 | 49 | 80 | 4 | 12 | 60 |
| HEPMP-1000B | 1000 | 5600 | 650 | 302 | 49 | 80 | 4 | 12 | 75 |
| HEPMP-1500B | 1500 | 8400 | 950 | 302 | 49 | 100 | 4 | 16 | 105 |
| HEPMP-2000B | 2000 | 11200 | 950 | 386 | 49 | 100 | 4 | 16 | 145 |
Note 1. The definition of rated lifting capacity for series EP magnets: Rated lifting capacity=The max.pull-off strength at 1.0mm working air-gap/1.5.