Low Profile Load Cell Sensor NA10 (30-200kg)
NA10 is a low profile single point parallel beam load cell with aluminum alloy material and surface anodized. The Aluminum Load Cell is suitable for a wide range of weighing scales. It’s potted and silicone sealed construction, protected to IP66.
Key Features:
Highaccuracy OIML approved
Calibratedto national standards
Aluminumalloy construction
Easyto install
Usage & Applications:
pricecomputing scales
counting scales
weighing scales
retail scales
Dimension:
NA10 Specification: Rated Capacities | 30,35,60,100,200 (kg) |
Rated Output | 2.0 mV/V±10% |
Zero Balance | ±0.0200 mV/V |
Non-linearity | 0.02 %R.O. |
Hysteresis | 0.02 %R.O. |
Repeatability | 0.02 %R.O. |
30mins Creep | 0.02 %R.O. |
30mins Return | 0.02 %R.O. |
Safe Overload | 150 %R.O. |
Ultimate Overload | 200 %R.O. |
Temperature Effect On Output | 0.002 %R.O./℃ |
Temperature Effect On Zero | 0.003 %R.O./℃ |
Input Impedance | 410±15 Ω;1130±30 Ω |
Output Impedance | 350±5 Ω; 1000±10 Ω |
Insulation Impedance | ≥5000 MΩ/(50VDC) |
Recommended Excitation | 5~12 VDC |
Maximum Excitation | 15 VDC |
OperatingTemperatureRange | -20~60 ℃ |
Construction | Aluminum Alloy |
Protection Class | IP66 / IP67 |
Cable | φ4×0.5m |
Recommended Platform Size | 350×400 mm |
Mode of Connection | Red(EXC+),Black(EXC-),Green(SIG+),White(SIG-) |