Product Application
Waste Plastic Film, Woven Bags Agglomerator /Compactor Machine is mainly suitable for processing complete film,plastic bags and fibber into small granules,the final granules can be used for send into extruder to pelletizing again.
After the waste is put into the machine pot, the material is quickly cut into pieces by the shearing action of the rotating blade and the fixed blade at high speed. The cut material or piece flows along the inner wall of the pot under the centrifugal force of the rotary cutter head, while the material is turned up and down by the action of the lower propeller, moving from all around to the center of the pot body. Due to the friction between the material itself and the pan wall and blade at high speed, a large amount of friction heat is generated, which makes the material temperature rise rapidly to semi-plasticized state and adhere to each other into small pieces. Before the material is about to be caked, all the pre-prepared quantitative water is sprayed into the material. When the cold water meets the hot material, it gasifies quickly and takes away the surface heat of the material, so that the surface of the material can be cooled sharply to prevent caking, and then it is cut into particles by the crushing action between the rotating blade and the fixed blade (irregular in size). Granular material). In the process of chopping, appropriate pigments can also be added for coloring according to the need. The granular material produced by this machine can be directly used for extruder and injection moulding machine products. For products with stricter requirements, it can be used after granulating by extruder and granulator. GSL series high-speed pelletizer pot body material is stainless steel, blade material is T7
Working Video:www.youtube.com
Features of Plastic Film Compactor Agglomerator:
This Plastic Film Compactor Agglomerator is mainly suitable for processing complete film,plastic bags and fibber into small granules,the final granules can be used for send into extruder to pelletizing again.
1.strong design of double bearing for holding the main shaft
2. High performance blades
3.Water flushing automatically
4.Motor power:37KW-132KW
5.Capacity:100-800kg/h
Applicable material of Plastic Film Compactor Agglomerator:
Soft PVC, LDPE, HDPE, PS, PP, foam PS, PET fibers and other thermoplastics,etc.
When the waste plastic is supplied into the chamber, it will be cut into smaller chips due to the crushing function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement of material being crushing and the wall of container will be going to become semi-plasticizing state. The particles will stick with each other due to the function of plasticization.