2-Axis Servo Robot Arm Supplier Supplies 2-Axis Servo Robot Arm, for Plastic Injection Molding Machine, Travel 600-800mm, IMM Range 50-250 Ton, AC Servo Motor.
Runma 2 axis 600-800 Series traversing robot arm is applicable to all types of horizontal injection machine ranging from 50 to 250 ton for products and sprues take-out.
Single stage or telescopic type vertical arm, with product arm and runner arm, for two plate or three plate mold products take out.
Y-, Z-axis driven by AC servo motor, can realize products stacking up on any points at Y, Z directions, can cut the runner by scissors driven by the cylinder.
| Model | Applied to injection molding machine (ton) | Travel | Side posture angle (degree) | Max load (including fixture) | Time (sec) | Driven way | Working pressure (kgf/cm2) | Air consumption (nl/cycle) | Power | Power consumption | NW (kg) |
| up and down | pull out | cross traveling | take-out | empty loop |
| RQ-600ID(S2) | 50-180 | 600 | 165-650 | 1150 | 90 | 3 | 1.3 | 5 | x, y, z AC servo motor | 5-7 | 8 | AC220±10V 50/60HZ | 3.2 | 190 |
| RQ-700ID(S2) | 150-220 | 700 | 165-850 | 1350 | 1.4 | 6 | 220 |
| RQ-800ID(S2) | 150-280 | 800 | 165-850 | 1350 | 1.5 | 6.5 | 245 |
| Model | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O |
| RQ-600ID(S2) | 1250 | 1870 | 400 | 1150 | 1340 | / | 165 | 490 | 350 | / | 650 | / | 100 | 70 | 110 |
| RQ-700ID(S2) | 1310 | 2070 | 1350 | 1440 | 750 |
| RQ-800ID(S2) | 1370 | 2070 | 1350 | 1440 | 750 |