Introduction
Tubular centrifuge is composed of a mainbody, a transmission device, a bowl, a liquid trap and an inlet bearing block.A flexible principal axis is located at the upper part of the bowl and adamping floating bearing is designed at the lower part; the principal axis isconnected to the driven wheel by a buffer seat, and power is transferred to thedriven wheel by motor via a belt conveyor and tension pulleys to achieve thebowl rotating at extremely high speed around its own axis, forming a mightycentrifugal field; the feed liquid is injected via the inlet orifice at thebottom, and the centrifugal force drives the liquid to flow up along the bowlinner wall; liquid components stratify due to their different densities: thecomponent with high density (solid) settles to the bowl inner wall, and theheavy liquid settles to the inside of the solid phase, flows out via the heavyliquid outlet and is collected by the heavy liquid trap; the light liquid inthe components settles to the innermost part, flows out via the light liquidoutlet and is collected by the light liquid trap; the solid phase, after depositinga period of time, can be extracted at shutdown. If the separation involves onlya liquid and a solid, then separating heavy and light liquids is not needed.The liquid-solid types are called GQ types, and the liquid-liquid-solid typesare GF types.
We are mainly used for the liquid-solid separationor liquid-liquid-solid separation in the fields of bio-medicine, preparation oftraditional Chinese medicines, plant extraction, health foods, beverage,chemical engineering and so on.
Types and Technical Parameters
Type | 145-B | 145 | 125 | 105 | 75 |
Bowl inner Dia mm | 142 | 142 | 125 | 105 | 75 |
Bowl Volume L | 11 | 11 | 9 | 6 | 2 |
Bowl speed r/min | 14000 | 14000 | 14000 | 16000 | 20000 |
G.F. | 15900 | 15900 | 13700 | 16000 | 16700 |
Thrpughput capacity T/h | 1.5 | 1.5 | 1.2 | 1.2 | 0.2 |
Motor Power kW | 3 | 3 | 3 | 3 | 1.5 |
Note: GQ indicates liquid-solid types, and GF indicatesliquid-liquid-solid types.
Generally, a tubular centrifuge we providehas 304 stainless steel at where it contacts the liquid, and has a cylindricalpedestal structure which is wrapped by 304 stainless steel; of course, if yourequire, we can also manufacture the centrifuges with other materials, e.g.316L or duplex stainless steel, or design a square box pedestal, a coolingcoil, a check valve or else, or provide variable frequency control, a bowlcarrier, a unit system and so on.
