3D Blender Used For Plastic Product introduction 3D mixer 1. Regularly inject lubricating oil and grease into the reducer and bearings. 2. Check the tightness of the belt and chain before starting the machine, and adjust, repair or replace it according to the situation. 3. Check that the steering of the drive shaft is...
Product Details
Description
Product introduction
3D mixer
1. Regularly inject lubricating oil and grease into the reducer and bearings.2. Check the tightness of the belt and chain before starting the machine, and adjust, repair or replace it according to the situation. 3. Check that the steering of the drive shaft is consistent with the direction of the sign.
Structural features
4. Start the motor with no load and check whether the motor is running normally. After the motor starts and during operation, always check the indicator lights of the control panel and the display value of the controller, listen to the sound of the motor, and immediately stop for maintenance if any abnormality is found.5. After the operation of 3D Blender used for plastic is completed, turn off the power and clean the mixing tank in time to keep the equipment clean.
6. When the motor of 3D Blender used for plastic does not run, check whether the power switch is closed, whether the wiring is firm, whether there is a problem with the relay, and take corresponding measures; when the motor runs but the main shaft does not rotate, check whether the V-belt is too loose and whether the clutch is closed. , the clutch clearance is too large and the friction plates are excessively worn, and corresponding measures shall be taken.
Hot Tags: 3d blender used for plastic, China, manufacturers, suppliers, factory, price, vibratory sifter, Swing vibrating screen, Vibro Screen Separator For HDPE Granules, vibro sieve, Powder Conveying System, plastic granules vacuum loader