High Swing Screen For Screening Accuracy Swing screen is an imitation of artificial screening of low frequency rotary vibration screen, its principle is: instantaneous motion along the radial displacement and the displacement as the axis of the synthesis of circular motion (spiral motion).
Product Details
Description
Product description Swing screen is an imitation of artificial screening of low frequency rotary vibration screen, its principle is: instantaneous motion along the radial displacement and the displacement as the axis of the synthesis of circular motion (spiral motion). The shaker can adjust the eccentricity to produce nonlinear three-dimensional motion, the material also produces the same approximate manual movement, so as to achieve the purpose of screening, and then with the screening accessories can get more ideal screening effect; Suitable for spherical, cylindrical, sheet, and even irregular shape easy to block mesh and need precision screening materials.
1. Up to 5 times the output per unit area; Accurate to 6 stages of separation, screening efficiency up to 90%-95%; The use of silicone rubber ball, ultrasonic and other efficient cleaning device system, screen hole will not be blocked. Closed dust removal, safe operation: acceleration is 4.5 times lower than the vibrating screen, screening parts to improve life and reduce maintenance: noise < 75 decibels. Optimized weight balance, low dynamic load of foundation. 2. The basic rotary motion is similar to manual screening. Eccentricity is adjustable from 25 to 40mm. Low speed V-belt drive is adjustable from 120 to 360rpm 3. The residence time of each product can be adjusted by the radial and cutting Angle of the swinging screen towards the driving axis 4. Therefore, the horizontal and throw three-dimensional tumbling motion is established. Material from the center to the outer edge in the entire screen surface evenly dispersed, so as to spiral motion to the axial propagation. Small particles complete the screening process. 5. The horizontal and vertical accelerations increase with the movement of the particles, and particles close to the size of the sieve are successfully separated and larger particles are transported to the exit. The flow is controlled by an adjustable guide at the outlet, which is another factor controlling material residence time. 6. This process is repeated between each screen layer.