Linear Vibrating Screen One, giant treasure YS straight line screen working principle Jubao YS linear screen is driven by double vibration motor.When the two vibration motors run synchronously and reversely, the exciting force generated by the eccentric blocks cancel each other in the direction parallel to the motor...
Product Details
Description
One, giant treasure YS straight line screen working principle
Jubao YS linear screen is driven by double vibration motor.When the two vibration motors run synchronously and reversely, the exciting force generated by the eccentric blocks cancel each other in the direction parallel to the motor axis, and stack into a resultant force in the direction perpendicular to the motor axis. Therefore, the motion trajectory of the materials on the Jubao YS linear sieve machine is a straight forward parabolic motion.The two motor shafts have an inclination Angle to the screen surface. Under the combined action of excitation force and self-gravity, the material is thrown up on the screen surface and moves forward in a straight line by jumping, so as to achieve the purpose of screening and classifying the material.
Jubao YS straight line screen (Jubao YS straight line screen) main performance characteristics: Jubao YS straight line screen is stable and reliable, less consumption, low noise, long life, stable vibration mode, high screening efficiency.
(1) Product introduction
Jubao YS linear screen is composed of vibration motor, screen box, screen mesh, vibration transmission body, vibration reduction device.The excellent horizontal motor is used as the power source, so that the material is thrown on the screen while moving forward in a straight line. It can be equipped with single-layer or multi-layer screen to achieve the purpose of classification, impurity removal, powder removal, inspection, final, washing, dehydration and so on.To reach the purpose of sky screening with reasonable matching screen mesh.The material enters the feeding port of the sieve machine evenly from the material passing through the sieve machine, and produces several kinds of products and the unqualified upper and lower contents of the sieve through the multi-layer sieve respectively discharged from their respective exits.Can be used in the pipeline to achieve automated operations.
(2) Equipment features
◆ The special structure design of the grid can be quickly changed and tensioned
High screening efficiency and low noise
◆ Long stroke of material on the screen, high fineness of screening, large handling capacity
◆ At the same time of screening, the material is transported for a long distance
◆ The screen surface spacing and inclination Angle can be changed according to the particle size, sieve probability and productivity
◆ Different shapes and structures can be designed according to the production site.
(3) Application fields:
In chemical industry, food, metallurgy, mining, building materials, grain, abrasive, fertilizer, coal industry in the granular, powdery material sieving powder, grading has a wide range of applications.
Second, jubao YS linear vibrating screen structure
Jubao YS linear screen is mainly composed of screen box, net frame, screen, vibration motor, motor pedestal, vibration damping spring and bracket.
1. Screen box: it is made of several steel plates of different thickness and has certain strength and stiffness. It is the main part of the screen machine.
2. Mesh frame: made of wood with small deformation, used to keep the screen flat and tensioned to reach normal screening.If the specific gravity is large or the output is large, the metal screen frame can be used
3, screen: with the composite national standard stainless steel screen.
4. Please refer to the operating manual for the use and maintenance methods of vibration motor.
5, motor pedestal: the motor pedestal of the standard type (motor mounted under the screen box) screen machine can be moved. The connection screws must be tightened before use, especially the new screen machine must be tightened repeatedly three days before trial, so as not to cause accidents due to looseness.
6, damping spring: prevent the vibration to the ground and support all the weight of the screen box.When installed, the spring must be perpendicular to the ground.
7. Support: It is composed of channel steel, supporting the main body of the vibrating screen.The strut shall be installed perpendicular to the ground, and the channel steel below the strut shall be parallel to each other.
Iii. Installation and debugging
Rubber springs have been tested for static rigidity before leaving the factory. Springs with the same (or similar) rigidity should be selected for different supporting parts of the same vibrating screen.Install the rubber spring on the brackets, the brackets on the convex platform into the spring hole, and then lifting body, you must see to it that the inner hole of the rubber spring up with convex sets to support plate, falls down the screen box, placed on the rubber spring, at each point should match the height of the rubber spring, error may not be greater than 2 mm.The connection of each part of the screen machine must be firm and reliable. All bolts shall not be loosened, and each part shall not have any abnormal sound. The small gap between the vibrating part on the main body and the surrounding fixed objects shall be 30-50mm.
Regular inspection and maintenance
Before starting the sieve machine, it is necessary to check whether there are obstacles hindering the operation of the sieve machine around, and whether all the connection bolts are fastened, especially the fixed bolts of the vibration motor, the support seat and the sieve plate should be tightened again.Check whether the steering of two vibration motors or exciter is opposite. If the steering is the same, the power connection of one motor should be changed so that the steering of two motors is opposite.After 4 hours of continuous operation, the bearing temperature shall be measured and shall not exceed 75℃.Before the sieve machine stops, it should stop feeding first, and stop after the sieve surface material has gone.Clean up the materials and sundries on the screen in time after parking.
What should be paid attention to in the first operation of the shaker?
1. Whether the fuselage is in a horizontal state.
2. Whether the frame is properly fixed.
3, whether the screen is flat
4. Whether the belt-ring screws of the fuselage frame are locked.
5. Whether the transport support between the screen frame and the frame is removed.
6. The power supply should be connected correctly, and it is strictly prohibited to operate without any phase loss.
7. After starting the machine, pay attention to observe the material track and adjust the running track to the desired state according to the sieving material