3D Spice Powder Mixer With Blades Product introduction 3D mixer The materialof 3D spice powder mixer with blades is all stainless steel. The speed can be selected with variable frequency speed regulation and brake timing control. The loading and unloading is butterfly valve or quick-opening type, which is simple and convenient,...
Product Details
Description
Product introduction
3D mixer
The materialof 3D spice powder mixer with blades is all stainless steel. The speed can be selected with variable frequency speed regulation and brake timing control. The loading and unloading is butterfly valve or quick-opening type, which is simple and convenient, and optional vacuum loading and so on. It can also be customized according to your requirements!
Structural features
The mixing barrel of 3D spice powder mixer with blades is suspended on the ends of the main and driven shafts through two Y-shaped universal joints, which are both intersecting and perpendicular to each other in space. When the driving shaft is dragged and rotated, the universal joint makes the material barrel perform compound motions such as translation, rotation and tumbling repeatedly in space, and the material follows the three-dimensional compound motion of axial, radial and circumferential directions in the barrel. A variety of materials flow, diffuse, and dope with each other in a uniform state.
Performance characteristics
1. Check whether the solid parts of the machine parts are loose; whether the driving wheel parts have entrained debris, and whether the status signs meet the specified requirements.
2. Turn on the power supply, and run the 3D spice powder mixer with blades machine for more than 3-5 minutes with no load. At this time, you should pay attention to whether the machine has any abnormality. If there is, you should stop it immediately for inspection.
3. Turn on the "swing jog" knob, slowly adjust the feeding port to the proper position, open the feeding port and add materials by lifting, the loading capacity is 60% of the barrel volume, and the top cover is tightly closed to prevent loosening.
4. Before the trial operation of each single machine, it is necessary to check whether there are metal products in the machine, if there is, remove it, whether the bolts are prohibited, the tightness of the belt, the reliability of the protective cover, etc.