Welcome Customer !

Membership

Zhengzhou Runxiang Machinery Equipment Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 畜牧机械

Xwboo>Products

Zhengzhou Runxiang Machinery Equipment Co., LtdFree·1YRS

  • E-mail

    susan@pelletmilling.com

  • Phone

    +86-371-55960109

  • Address

    NO 41TH,JINSUO ROAD,ZHENGZHOU,CHINA

Contact Now

Charcoal Briquette Production Line

Model
Nature of the Manufacturer
Other
Product Category
Farm Machine
Place of Origin
City, Province
Overview
The briquetting machine production line is suitable for refractory material production, power plant, metallurgy, chemical industry, energy, transportation, heating and other industries.
Product Details

Charcoal briquette production line product description


The charcoal briquette production line first adds an appropriate amount of water and binder to the powdered minerals to make green balls with uniform particle size and sufficient strength. The green pellets are granulated in an oxidizing atmosphere after drying and preheating. Because pellets have good agglomeration strength, reducibility and particle size, they become as important blast furnace charge as sinter. Together they form a good compositional structure.

 Charcoal briquette production line application


The briquette machine charcoal production Line is used for pressing quicklime, magnesium powder, copper concentrate, chromium powder, lead-zinc waste, bauxite, non-ferrous metals and other high-strength spheres that are difficult to form powder materials under high pressure. Powders, refractories, ceramics, etc. Widely used in metallurgical industry, chemical industry and refractory industry.

Raw materials and precautions


1. Machinable raw materials: iron ore, manganese, chromium, nickel, iron powder, silicon-manganese alloy, iron scale, silicon carbide, manganese ore powder, phosphate rock, kaolin and other mineral powders.


2. Material particle size and moisture requirements before briquetting: In order to ensure good quality and mechanical strength of the final product, special attention should be paid to ensure that the particle size fed into the machine is kept below 3mm, preferably within the following range of 30-40% less than 1 -2 mm, no more than 10% over 2 mm.