Automatic toothpick machine line include 10 or 8 sets of machine,which can make bamboo toothpick machine line and wood toothpick machine line.
Product Details
Description:
1.sawing machine (bamboo)
sawed 400mm*160T,used for feeding and cutting bamboo, better length is 1-1.2m
2. Bamboo split machine
dissection cutter head(9-18heads)total 10,put the finished bamboo into the suit cutter headaccording to the size and polish them into bamboo flakes, width from 20mm to 22mm,speed of feeding is 57m/min
3. fix thick and definitely wide flaker
put the polished bamboo flakes into this machine and make it to be square and straight every side, width from 18-20 mm, width of flaker is 3-4mm,speed of feeding is 87m/min
4. Bamboo filament shaping machine
molding the diameter of the bamboo filament as your request ,speed of feeding is 87m/min
5. Bamboo filament set-size machine
set uniform length of the stick ,as usual 5 or 6times of toothpick length
6.toothpick set size machine cut the long stick into 65mm ,standard length of toothpick
7.Polishing machine
polish the raw stick after set-size
8.orderting machine
Order the stick from polishing machine ,easy for worker to pick them into sharpen machine
9.toothpick sharpen machine
Sharpen two tips or one sharpen one carve head
10 . Multi-sharpen machine
Sharpen the cutter and saw
11.By changing different sets of machines,this machine line can make different products.
Technical information:
Item
Model
Weight(KG)
Size(mm)
Motor power
1
Sawing machine (Bamboo)
WS-791
65
750*600*1300
1.5kw
2
Bamboo dissection machine
WS-04
530
3000*950*1200
3kw
3
Flakers
WS-036
320
1180*680*1100
5.9kw
4
Combined flakers
WS-211
450
1020*690*1050
1.1kw
5
Bamboo filament shaping machine
WS-05 C
75
1500*700*900
7.1kw
6
Bamboo filament set-size machine
WS-741
240
900*700*950
0.75kw
7
Polishing machine
WS-543
120
1050*1050*1200
2.75kw
8
Toothpick set-size machine
JX-956
70
1050*900*850
2.75kw
9
Tooth pick mincing machine (unoccupied or amphibole)
1. Pay attention to safety when using the machine. Before starting the machine, first pull the belt of the cuter shaft with hands to make the rolling cutter turning and to see if any rolling cutter strikes other hard objects. If yes, it is necessary to remove the objects and avoid damaging the cutter and injuring human body.
2. Keep the protecting cover closed.
3. When the machine is running, it is strictly prohibited to stretch out hands into the machine. If there is need to remove scraps, it should be done after the machine stops securely.
Maintenance
1. Frequently check temperature rising of all the bearings, especially, those of rolling and planing cutter shaft. If the temperature rising is too high, it is necessary to adjust the bearings until they are flexible and smooth. Replace the grease at least once in half year. Fill in grease to 1/2 – 2/3. The grease must be clean and added in regularly.
2. Frequently check bearing clearance. If the clearance is too large, it is necessary to replace the bearing in time. Bearings with precision over Class E should be used for the cutter shaft.
3. Gear and chain wheel should also be lubricated frequently.
4. After using the new machine for a period, it is necessary to check the belt tightness and adjust it.