l Realize the transparent transmission of Ethernet data in 1 ~ 8E1 circuit;
l CRC alarm threshold can be set to automatically isolate the line with poor transmission quality, and it is unidirectional to cut off when 2M branch;
l When the error rate in one direction exceeds the threshold, the direction is cut off and the other direction is not affected. That is, the two directions of the Ethernet transmission can be asymmetric.
l To allow multi-E1 has 10ms transmission delay difference. When the difference exceeds the allowable range, the system can automatically stop sending data over the E1 with too much delay. Loopback: E1 local loopback and E1 remote loopback;
l Built-in dynamic Ethernet MAC address list (4096), with local data frame filtering;
l E1 interface with ITU-T G.703, G.704 and G0823; E1 interface module contains a built-in clock recovery circuit and HDB3 codec circuit;
l Equipment supports E1 channel hot swap, and automatically detects the effective E1 channel, the middle will not interrupt the data transfer;
l Support E1 ~ 8E1 flexible configuration, the number of E1 automatically detects the reset and delay and select the available E1 port;
l Support the local system to reset the remote system; with Ethernet monitoring automatic reset function.