Welcome Customer !

Membership

corporate name:Foshan Qingyi metal material Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 铜接线端子

Xwboo>Products

corporate name:Foshan Qingyi metal material Co., Ltd.Free·1YRS

  • E-mail

    3576297451@qq.com

  • Phone

    0757-228198920757-22819893

  • Address

    News 3 / F, No. 80 west of Shiliang Road, Jizhou village, Lunjiao street, Shunde District, Foshan (residence declaration)

Contact Now

High power laser cutting copper aluminum stainless steel iron plate

Model
Nature of the Manufacturer
Other
Product Category
Laser cutting
Place of Origin
City, Province
Overview
Foshan Qingyi undertakes high-power laser cutting of copper, aluminum, stainless steel, iron plate and various sheet metal laser cutting
Product Details

Laser cutting is to use the focused high-power density laser beam to irradiate the workpiece, so that the irradiated material can quickly melt, vaporize, ablate or reach the ignition point, and blow away the molten material with the help of the high-speed air flow coaxial with the beam, so as to cut the workpiece. Laser cutting is one of the thermal cutting methods.

Laser cutting uses high-power density laser beam to scan the material surface, heat the material to thousands to tens of thousands of degrees Celsius in a very short time, melt or gasify the material, and then blow the melted or gasified material away from the cutting seam with high-pressure gas to achieve of cutting the material. Laser cutting, because the invisible beam is used to replace the traditional mechanical knife, the mechanical part of the laser knife head has no contact with the work, and will not scratch the working surface in the work; The laser cutting speed is fast, the incision is smooth and flat, and there is generally no need for subsequent processing; Small cutting heat affected zone, small plate deformation and narrow cutting seam (0.1mm ~ 0.3mm); The notch has no mechanical stress and no shear burr; High machining precision, good repeatability and no damage to the material surface; NC programming, can process any plan, can cut the whole board with large format, no need to open the mold, economical and time-saving.

Laser is a kind of light. Like other natural light, it is produced by the transition of atoms (molecules or ions, etc.). However, it is different from ordinary light in that the laser only depends on spontaneous emission in a very short time at the beginning, and the subsequent process is completely determined by stimulated emission. Therefore, the laser has very pure color, almost no divergent directivity, very high luminous intensity and high coherence. Laser cutting is realized by using the high power density energy generated by laser focusing. Under the control of the computer, the laser is discharged through the pulse, so as to output the controlled repetitive high-frequency pulse laser to form a beam with a certain frequency and pulse width. The pulse laser beam is transmitted and reflected through the optical path and focused on the surface of the processed object through the focusing lens group to form fine and high-energy density light spots, which are located near the surface to be processed, Melt or gasify the processed material at an instant high temperature. Each high-energy laser pulse splashes a small hole on the surface of the object at an instant. Under the control of the computer, the laser processing head and the processed material conduct continuous relative movement according to the pre drawn figure, which will process the object into the desired shape. The process parameters (cutting speed, laser power, gas pressure, etc.) and motion trajectory during slit cutting are controlled by the numerical control system, and the slag at the slit is blown away by the auxiliary gas with a certain pressure.

Foshan Qingyi undertakes high-power laser cutting copper plate, aluminum plate, stainless steel plate and various section steel cutting and bending processing. Welcome to consult!

Similar Product Recommend