Tanvi sanitary vent filter housing heater are designed entirely according to GMP standard and consists of a stainless steel vent filter, a filter housing heater and a temperature controller. The thermal characteristics of
vent filter housings must be tightly controlled to prevent condensation on the filter element that may compromise the vessel and organisms from escaping from the process. Due to the unique function, the products play a important role in biopharmaceutical and fermentation industry.
Features and Benefits
Air that between filter housing and jacket and heating jacket provide double heat preservation;
Laddering temperature control prevent the
condensation and overheating damage on filter element;
Over-temperature protection;
Good heated and heat preservation performance
reduced energy consumption;
Exterior surfaces that are safe to touch and do not
require costly heat shrouds;
Velcro strip and encapsulated by Teflon offer convenient installation and dismounting;
Temperature ranges can be adjusted;
Low working noise
Specification
Nominal voltage | | 220V |
Withstand test voltage | | 1.5kv |
Insulation resistance | | >5MΩ |
Insulating material | | Teflon |
Working environment temperature | | -60℃~250℃ |
Operating temperature | | 0~150℃ |
Temperature controller indication | | Heating—red number |
Temperature set | | Green led |
Sensor | | k-type thermocouple or PT100 |
Typical application
Pharmaceutical Process Fluids
Fermentation
Product Recovery
Water for Injection
Filtration and Purification Processes
Skidded Systems
Tanks and Vessels
Order information
Model number | Dimension | Power | Exhaust modes | Material |
TS46HC05SJ | 5" and -226 adapter | 100W | Top and bottom discharge | Shell: SS 304 Filter housing: SS 316 Temperature controller: SS |
TS46HC10SJ | 10"and -226 adapter | 200W |
TS46HC20SJ | 20"and -226 adapter | 400W |