Welcome Customer !

Membership

Hangzhou Tanvi Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Hangzhou Tanvi Technology Co., Ltd.Free·1YRS

  • E-mail

    info@tanvifilter.com

  • Phone

    +86-571-88720211

  • Address

    Longtan road NO,20,Yuhang distrct,Hangzhou city,China

Contact Now

Filter heater Jackets

Model
Nature of the Manufacturer
Other
Product Category
Filter Housings
Place of Origin
City, Province
Overview
Filter heater Jackets
Product Details
Teflon Electrical Heating Vent Filter
Filter heater, respirator heater is designed in accordance with the requirements of GMP, which consists of flexible heating and temperature control box temperature control box composed of two parts. Mainly used for the filter housing to provide heating. Insulation function to prevent the accumulation of condensate and microbial breeding. Widely used in biological products, pharmaceuticals, fermentation and other industries in the water for injection systems, filtration and purification processes and cans and containers of filters and respirators.
Technical Parameters
Rated voltage: 220V
Voltage withstand voltage: 1.5kv
Insulation resistance: > 5MΩ
Insulation material: (silicone rubber)
Ambient temperature: -60 ℃ - +250 ℃
Operating temperature: 0-150 ℃
Display mode: Heating temperature - red LED,
Set temperature - green LED
Sensor: Type K thermocouple or PT100
Main Feature:
1. Electric heating plate power section decreases. - control the filter temperature difference caused by excessive temperature above or below the condensation or over-temperature damage.
2. Built-in over-temperature circuit breaker (heating temperature exceeds 140 ℃) - to prevent instrument failure / line fault abnormal temperature damage filter.
3. Electric heating sleeve using porous polymer insulation - full energy saving, heating the outer surface of the set at room temperature.
4. Stereotyped magic sticky buckle design, Teflon coated - easy to disassemble, install.
5. intelligent double-three display temperature control system, heating temperature can be adjusted at 0-150 ℃.
Applications:
Pure water tank, injection water tank, ingredients tank and other products of the respirator to prevent heat insulation filter to form condensed water.
Freeze-Dryer Gassing Filter - Removal of Condensate after Steam Sterilization Residual or Integrity Tested Moisture
Raw materials and finished liquid filter heating insulation filter drying and so on.
Tanvi Product Selection Table

Product Code

Heater Jacket

Length

Power

Operating Temperature

TSA05SBTZ

Type A

5"

150 W

≤150℃

TSA10SBTZ

10"

200 W

TSA20SBTZ

20"

400 W

TSB05TBTZ

Type B

5"

100 W

≤150℃

TSB10TBTZ

10"

200 W

TSB20TBTZ

20"

400 W

Similar Product Recommend