Overview
JM-C-3ZS intelligent speed monitor is mainly used for rotating machinery speed measurement. Users can use various sensors according to the actual situation of the unit. This device greatly improves the ease and reliability of installation. It can monitor the rotating machinery in equal parts of 1 tooth and 120 teeth, and measure 1 revolution per minute. With large value memory and display and three-way alarm switch signal output. This device highlights the human-oriented guiding ideology, is highly intelligent, realizes board operation, and is suitable for long-term online monitoring without on-site maintenance.
Functions
1. Highly intelligent, parameter setting realizes board operation
2. Suitable for long-term online monitoring, convenient and simple installation and debugging, without on-site maintenance.
3. Alarm and danger switch output.
4. With 4-20mA current analog output.
5. Arbitrary setting of range, alarm, danger and overspeed value.
6. Great value memory and query.
Technical parameters of the instrument
1. Display mode: LED digital display 2. Measuring range: 0~9999 rpm (high speed measuring range 0~99999 rpm ) 3. Measuring accuracy: ±1 rpm 4. Number of teeth setting: 1~120 teeth Arbitrary setting (factory value 60 teeth) 5. Input mode: (1) CS-1 sensor signal (2) CS-3 sensor signal (3) CWY-DO-φ8mm eddy current sensor | 6. Output mode: (1) Current output: 4~20mA (load ≤1KΩ) (2) Three-level switch output: DC 27V/2A or AC250V/5A 7. Use environment: (1) Temperature -10~65℃ (2) Relative humidity ≤85% 8. Power supply voltage: AC85V-265V/50-400Hz 9. Installation method: Disc type 10. Dimensions: Conventional style: 170mm (length) × 95mm (height) × 170mm (depth) 11 , Hole size: conventional style: 152mm (length) × 77mm (height) |
Installation and use of the instrument
The intelligent speed monitor should be installed in a clean, dry, environment with no corrosive gas at an ambient temperature of -10~45℃. It is not suitable to install in a place with strong electric field, strong magnetic interference, strong impact or vibration. Use a shielded cable as the connecting wire between the instrument and the sensor, and the instrument can be put into use only when the wiring of the instrument is correct.
Ordering guide
Order number | Sensor selection A | Range selection B | Extension C |
JM-C-3ZS- Intelligent Speed Monitor | 1: CS-1 speed sensor 2: CS-3 speed sensor 3: CWY-DO-φ8mm eddy current sensor n: special requirements | 0: None (arbitrarily set, default 4000rpm) | 0: None 2: Dual current |
Note: The values marked with * are the conventional fixed values when the company leaves the factory.