I. Overview
JM-B-39 integrated intelligent vibration protection transmitter is an integrated, intelligent, high-protection vibration protection transmitter. It can provide 4-20 mA current signal output, which is proportional to the vibration speed or amplitude of the bearing bush or bearing seat of the rotating machinery. At the same time, it can also provide two-level switch output, TDM signal output, etc. It automatically collects vibration signals on the machine and uses the converted analog signals in PLC, DCS and DEH systems, etc.
2. Function
1. With a high degree of intelligence, the parameter setting realizes the board operation.
2. It is highly integrated, easy to install and debug, suitable for long-term online monitoring, and does not require on-site maintenance.
3. Mainly used to measure the vibration of rotating machinery (ie, tile vibration).
4. Secondary alarm switch output.
5. With 4-20mA current analog output.
6. With TDM interface output.
7. Set the alarm and dangerous values arbitrarily.
8. With self-check function.
9. With alarm self-locking function.
10. With large value automatic memory and query functions.
11. It is suitable for use in sites requiring explosion-proof and high protection.
Three, technical parameters
1. Display mode: LED digital tube display
2. Measurement channel: single channel
3. Measuring range: 0 ~ 20.0mm/s (default), customizable within the range of 0 ~ 100.0mm/s
4. Sensitivity: 0.0 to 20.0 mm/s (default) ±5%, broadband rms (root mean square)
[4mA is equal to 0.0 mm/s and 20mA is equal to 20.0 mm/s (default)]
5. Measurement accuracy: ±1%FS @25℃
6. Frequency response range: 10Hz ~ 1KHz
7. Output interface: (1) Current output: 4~20mA (load≤1KΩ)
(2) Secondary switch output: 2A 30VDC or 0.5A 125VAC
(3) TDM interface output
(4) RS485 communication interface output (optional)
8. Working temperature: -25℃ ~ +70℃
9. Supply voltage: 18 ~ 30 Vdc (typically 24Vdc)
10. Protection level: IP66
11. Power consumption: << span="">8W
12. Weight: 0.5 kg
13. Dimensions: 60 mm (diameter) × 113 mm (height)
14. Material: Stainless steel
15. Installation thread: M10 internal threaded hole
Four, ordering guide
Order number | Measuring range A | Installation thread B | Cable selection C |
JM-B-39- | 1: 10.0mm/s 2: 20.0mm/s * 3: 40.0mm/s 4: 50.0mm/s 5: 25.0mm/s 6: 30.0mm/s n: special requirements | 1: M10×1.0×10 (length) 2: M10×1.5×10 (length)* n: special requirements | 1: 2m armored 2: 5m armored 3: 10m armored 4: 2m non-armoured 5: 5m non-armoured * 6: 10m non-armoured n: special requirements |
Note: Specific requirements need to be described in the selection of special requirements, and "*" indicates the default option.