System specification
• Various types of vibration sensors can be calibrated. Such as piezoelectric acceleration sensor, magnetoelectric speed sensor and eddy current sensor.
• It can calibrate various vibration test instruments, vibration monitoring systems and data acquisition systems composed of the above sensors.
• The static calibration table used has been specially improved and is different from other static calibration tables. When the rotary micrometer changes the displacement, the test bench connected to it does not rotate, but only moves in a straight line. Keep the test bench surface and the eddy current sensor vertical at all times. Therefore, the calibration degree is greatly improved.
• The vertical and horizontal legs of the chassis of the calibration platform are adjustable. When the calibration table cannot be placed steadily due to uneven desktop or other reasons, the calibration table can be kept stable by adjusting the height of the fixed feet.
• It can be powered by AC voltage or DC voltage, which is convenient for on-site use. (Special instructions are required for DC power supply).
Technical parameters
1. Output vibration signal error
Internal signal source 10, 20, 40, 80, 160, 320, 640,
1280Hz ≤±0.3dB±1 word
Frequency accuracy
10, 20, 40, 80, 160, 320, 640, 1280Hz ≤±0.01%
2. Large vibration amplitude and large load.
Because the vibration table used by the JM-3B vibration calibration device is small in size, when calibrating different sensors (different weights) at different frequencies, the output amplitude of the calibration table will be different . Large vibration amplitude and large load refer to the large acceleration, large speed or large displacement value that the calibration table can output when the calibrated sensor is a certain weight at a certain frequency.
Specific indicators refer to the following table:
Weight frequency | ≤100g | ≤250g | ≤650g |
a(m/s) | v(mm/s) | d(μm) | a(m/s ) | v(mm/s) | d(μm) | a(m/s ) | v(mm/s) | d(μm) |
10Hz | 2.5 | 28 | 1300 | 3.5 | 40 | 1800 | 4 | 45 | 2000 |
20Hz | 15 | 85 | 1900 | 10 | 60 | 1300 | 5 | 28 | 640 |
40Hz | 60 | 170 | 2000 | 35 | 100 | 1100 | 12 | 35 | 380 |
80Hz | 100 | 141 | 800 | 40 | 60 | 320 | 14 | 20 | 110 |
160Hz | 75 | 53 | 150 | 35 | 25 | 70 | 12 | 8.5 | twenty four |
320Hz | 50 | 18 | 25 | 30 | 10 | 15 | 10 | 3.5 | 5 |
640Hz | 30 | 5 | 3 | 20 | 3.5 | 2 | 6 | 1 | * |
1280Hz | twenty three | 2 | * | 10 | 0.9 | * | 5 | 0.4 | * |
*When the frequency is high, because the vibration level value is very small, at these points, the calibration table has no vibration signal output.
Ordering Guide
Ordering code: JM-3B vibration calibration device