Signal 1. Input signal type: piezoelectric speed sensor, piezoelectric acceleration sensor, magnetoelectric speed sensor, eddy current sensor 2. Measurement parameters: amplitude (pp), intensity (Trms) 3. Input channel: dual channel 4 , Measurement accuracy: ±1%FS@25℃ 5. Frequency range: Shaft vibration (4~4KHz±3dB), bearing vibration (10~1000Hz) 6. Measurement range: Amplitude (1~500um user-defined), intensity (1 ~50.0mm/s user-defined) 7. Sensor power supply: constant voltage (-24Vdc isolation), constant current (4.0mA±10% from ±24Vdc isolation), no power supply (voltage input) Output 1, 4~20mA current: large load 750Ω, ±0.1%FS@25℃ 2. Relay: 6A/30Vdc, 6A/250Vac, SPDT dry node 3. Buffer output: sensor raw signal, output impedance 100Ω, large transmission distance 300 meters. It has two interfaces: BNC socket and backplane terminal. | Alarm 1. Number of levels: Level 2 alarm/channel 2. Delay: 0~250s, with an interval of 1s 3. Alarm value: User-defined 4. Alarm logic: ≥ 5. Dangerous bypass: Start, prohibit 6, multiply Control: start, prohibit Environment 1. Operating temperature: -30℃~+65℃ 2. Storage temperature: -40℃~+85℃ 3. Humidity: 95% non-condensing Appearance 1. Display: LED (blue light) 2. Buffer output interface: BNC interface 3. Size (height * width * depth): see the size of the chart Power supply 1. Power supply voltage: AC85~265V/50-400Hz 2. Power consumption: ≤15W |