Welcome Customer !

Membership

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 振动显示仪表

Xwboo>Products
Product Categories

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.Free·1YRS

  • E-mail

    jl80283688@163.com

  • Phone

    +86-510-80283688,ext-8888/8021

  • Address

    5 shenjiabang, Yunting street, Jiangyin City

Contact Now

VMS5100 draught fan vibration monitor

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
VMS5100 draught fan vibration monitor
Product Details

Overview
VMS5100 Fan Vibration Monitor is an independent and complete monitor installed in a sealed and sturdy chassis. It only needs to be connected to a DC power supply and the required output to work.
VMS5100 wind turbine vibration monitor is specially designed for low-frequency vibration monitoring. It mainly monitors the low-frequency vibration of the wind turbine tower and the nacelle as a whole. The built-in three acceleration sensors in the X, Y and Z directions can monitor the vibration of the three channels in real time. In case, the built-in high-performance digital processor performs digital band-pass filtering to extract the signal in the effective vibration frequency band. If the signal exceeds the limit, an alarm signal will be issued according to the user's configuration. In addition, the device has 4 independent 4-20mA standard analog current outputs; it can also communicate with the computer host computer system in real time through a variety of communication methods to achieve data storage, real-time viewing, user configuration and other functions.

Features

• Simultaneous measurement in the XYZ three-axis directions
• Monitoring of 12 independent frequencies, which can monitor a single frequency from each sensor or
  12 frequencies from a sensor
• Using a variety of reliable DSP digital filtering technologies, It also has detection capability
• 4 independent 4-20mA current analog output
• 4 programmable independent alarm relays and 1 system fault relay
• Each alarm relay has an independent programmable alarm threshold and delay time
• The upper computer software has the functions of real-time curve display, historical trend data storage, viewing, etc.
• The sensor circuit is protected by a built-in monitoring device, and the fault relay displays the fault condition.
• Measure effective value, peak value and peak-to-peak value
• Suitable for harsh temperature and humidity Environments interfered with electrical noise
• User-defined monitoring commands can be executed
• A variety of reliable communication methods
• Reliable filtering technology

Application field
   VMS5100 wind turbine vibration monitor is specially designed for low-frequency vibration monitoring, mainly monitoring the low-frequency vibration of wind turbine tower and nacelle as a whole.

Technical Parameters

Signal
1. Monitoring direction: X, Y, Z three-axis directions
2. Frequency range: 0.1~100Hz
3. Sensor sensitivity: 4V/g
4. Optional range: ±2g, error <2%< p="">

Output 1.
4~20mA current: large load 750Ω ±0.1%FS@25℃
2. Relay: 7A/30Vdc, 7A/250Vac, dry node
3. Communication method: RS-232/RS-485/CANopen

Alarm
1. Number of levels: Level 2 alarm/channel
2. Alarm value: User-defined
3. Alarm enable: Enable, disable
4. Alarm self-locking: Self-locking, non-self-locking

 

Environment
1. Working temperature: -25℃~85℃
2. Storage temperature: -45℃~110℃
3. Relative humidity: 95%, no condensation

Appearance
1. Dimensions: 263×130×75 (L×H×D) Unit: mm
2. Mounting hole size: 200×117 (l×h) Unit: mm
3. Installation position: Installed on the base of the nacelle next to the main shaft Seat
4. Degree of protection: IP65

Power supply
1. Power supply: 18~30W

Order information

 Order number

 function name

 Supporting sensor type

 communication

 VMS5102

 Structural vibration

 Two-axis sensor

 RS232

 VMS5103

 Structural vibration

 Three-axis sensor

 RS232

 VMS5112

 Structural vibration

 Two-axis sensor

 RS485

 VMS5113

 Structural vibration

 Three-axis sensor

 RS485

 VMS5122

 Structural vibration

 Two-axis sensor

 CANopen

 VMS5123

 Structural vibration

 Three-axis sensor

 CANopen

Chart size

VMS5100 fan vibration monitor chart size

Scan the QR code to read on your phone