Overview | The transmitter is an explosion-proof vibration speed transmitter, which provides a 4-20 mA current signal output, which is proportional to the vibration speed of the bearing bush or bearing seat of the rotating machinery. It automatically collects vibration signals on the machine and uses the converted analog signals in PLC, DCS and DEH systems, etc. The current range of 4-20mA is proportional to the vibration measurement value and the corresponding measurement range is connected through the "analog output" cable terminal. |
application | Used for rotating and reciprocating machines, such as fans, centrifuges, pumps, motors, reducers, industrial fans, heat exchangers/cooling towers, air-cooling island fans, generators, piston compressors, centrifugal compressors, gravel Machines/coal mills, compressors, pumps, coal mills, etc. |
Technical Parameters |
signal |
Measurement parameters | Intensity (Trms) |
Number of channels | Single channel |
Precision | ±1%FS@25℃ |
Frequency Range | 10Hz-1KHz |
Measuring range | 0-20.0mm/s, [4mA is equal to 0.0 mm/s and 20mA is equal to 20.0mm/s (default)], 0-50.0mm/s can be customized |
Output |
4~20mA current | Large load 750Ω, ±0.1%FS@25℃ |
physical |
diameter | 55mm |
height | 108mm |
Material | stainless steel |
Output Interface | Two-position terminal |
Explosion-proof grade | Exd II CT6 |
Installation thread | M10 internal threaded hole |
Protection | IP68 |
weight | 500g |
Connector Wiring Convention | +24V: 4-20mA positive loop, Iout: 4-20mA negative loop, terminal (Shield) = shell ground |
surroundings |
Operating temperature | -40℃~+100℃ |
stored temperature | -45℃~+110℃ |
humidity | ≤99% no condensation, no water immersion |
powered by |
Supply voltage | 18 ~30 Vdc (typical 24Vdc) |
Order information |
VMS 1160 explosion-proof vibration transmitter |
Order number | Measuring range A | Other B | description |
VMS1160-Ax-B00 | 10.0≤A≤50.0mm/s, the default measurement range: 0-20.0mm/s. For example: A20.0=measurement range: 0-20.0mm/s. | 00: no requirement | The transmitter output connector is a terminal block |
Connection cable |
Order number | Cable length A | Other B | description |
VMS602901-Ax-B00 | 1m≤A≤300m, in increments of 0.5m, default 3m. For example: A2.5=Cable length is 2.5 meters. | 00: no requirement | 2-core shielded cable, armored with plastic, armored diameter 8mm, <120℃ |
Annex 1: Mounting bolts |
Order number | description |
VMS604403 | M10 to M10×1.5×15 (long) |