application | Vibration, axial displacement, key phase and speed measurement of unit with sliding bearing |
Overview | It is used to measure the dynamic and static displacement of the object relative to the installation structure. It adopts non-contact measurement, and the components include: non-contact sensor, extension cable, proximitor (all three components). |
Product number | VMS808 eddy current sensor | VMS811 eddy current sensor | VMS818 eddy current sensor | VMS825 eddy current sensor |
electric |
Sensitivity | 8.0V/mm±5% | 4.0V/mm±5% | 1.5V/mm±5% | 0.8V/mm±5% |
Linear range | 2.0mm | 4.0mm | 8.0mm | 10.0mm |
Linearity error | ≤±1%FS |
Response frequency | 0-10KHz (-3dB) |
Explosion-proof grade | Exia II CT6 |
Measured area | Small surface φ20 mm | Small surface φ30 mm | Small surface φ50 mm | Small surface φ70 mm |
powered by | -23 Vdc-26Vdc (:-24V) |
Maximum output voltage | About -22Vdc (when the supply voltage is -24Vdc) |
Large current consumption | 15mA |
Output impedance | 50Ω |
surroundings |
Operating temperature | Probe: -40 to 120°C, extension cable connector: 125°C high, Proximitor: -40 to 80°C |
humidity | 95% non-condensing, no water immersion |
physical |
Probe diameter | 8mm | 11mm | 18mm | 25mm |
Thread specification | See selection |
Connection joint material | Stainless steel, gold plated |
Total probe length | 0.5m or 1m (including probe screw tail cable) |
System cable length | Total probe length + extension cable length: 5m±1% or 9m±1% |
Proximitor size | 89×75×35 (L×H×D) Unit: mm |
Material | Metal aluminum |
weight | 230g |
annex | Rail mounting base, probe fixing nut |
Order number 1: Standard probe | VMS808-01-ABCDE | VMS811-01-ABCDE | VMS818-01-ABCDE | VMS825-01-ABCDE |
Thread specification A | A00: M10×1.0mm Axx: User defined | A00: M14×1.5mm Axx: User defined | A00: M25×1.5mm Axx: User defined | A00: M30×2.0mm Axx: User defined |
Without thread length B | 0mm≤B≤230mm and B≤C-30mm, in 5mm increments, default: 5mm, for example: B5=5mm |
Screw length C | 30mm≤C≤250mm, in 10mm increments, default: 60mm for example: C60=60mm |
Total probe length D | 05: 0.5m, 10: 1m*, 50: 5.0m (direct connection type), 90: 9m (direct connection type) |
Connector and cable type E | 00: with miniature coaxial connector, standard cable*; 01: with miniature coaxial connector, armored cable 02: Miniature coaxial connector with protective sleeve, standard cable (no option for direct connection probe); 03: Miniature coaxial connector with protective sleeve, armored cable (no option for direct connection probe) |
Order number 2: Reverse mounting probe | VMS808-02-ABCDEF | VMS811-02-ABCDEF | VMS818-02-ABCDEF | VMS825-02-ABCDEF |
Thread specification A | A00: M10×1.0mm Axx: User defined | A00: M14×1.5mm Axx: User defined | A00: M25×1.5mm Axx: User defined | A00: M30×2.0mm Axx: User defined |
Without thread length B | 0mm≤B≤230mm and B≤C-30mm, in 5mm increments, default: 5mm, for example: B5=5mm |
Screw length C | 30mm≤C≤250mm, in 5mm increments, default: 60mm for example: C60=60mm |
Total probe length D | 05: 0.5m, 10: 1m*, 50: 5.0m, 90: 9m |
Connector and cable type E | 00: with miniature coaxial connector, standard cable*; 01: with miniature coaxial connector, armored cable 02: Miniature coaxial connector with protective sleeve, standard cable; 03: Miniature coaxial connector with protective sleeve, armored cable |
Order number 3: Extension cable | VMS808-11-AB | VMS811-11-AB | VMS818-11-AB | VMS825-11-AB |
Extension cable length A | 40: 4.0m*, 45: 4.5m, 80: 8.0m*, 85: 8.5m |
Connector protector and cable selection B | 00: standard cable*; 01: armored cable; 02: Standard cable with connector protective sleeve; 03: Armored cable with connector protective sleeve |
Order number 4: Proximitor | VMS808-21-ABC | VMS811-11-ABC | VMS818-11-ABC | VMS825-11-ABC |
Cable length A | 50: 5.0m system length, 90: 9.0m system length |
Install B | 00: DIN rail installation*, 01: bottom plate installation |
Seriously in hazardous situations C | 00: None, 01: Multi-agency certification |
Note: The user-defined part requires the user to describe the specific requirements, and "*" indicates the default selection. |
Attachment 1: Mounting rail |
Order number | description |
VMS600104 | Standard DIN35 mounting rail |