Welcome Customer !

Membership

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 振动显示仪表

Xwboo>Products
Product Categories

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.Free·1YRS

  • E-mail

    jl80283688@163.com

  • Phone

    +86-510-80283688,ext-8888/8021

  • Address

    5 shenjiabang, Yunting street, Jiangyin City

Contact Now

VMS701 piezoelectric acceleration sensor

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
VMS701 piezoelectric acceleration sensor
Product Details

Overview The
   VMS701 piezoelectric acceleration sensor is used in key rotating machinery (relative to the free surface) vibration that requires the measurement of shell acceleration, such as displacement, velocity, acceleration, etc. It is more suitable for monitoring the damage of bearings or gearboxes. The integrated circuit technology (VLSI) and ICP-type enhanced anti-interference design adopted by the sensor make the sensor highly integrated, which greatly improves the stability and reliability; it adopts crystal circuit, no moving parts, and no wear And degradation. It has a long service life and can be installed vertically, horizontally or at any angle.
   The circuit is completely isolated from the shell, avoiding the noise problem caused by multi-point grounding that often occurs in the field. The wide frequency band design makes the frequency range of the VMS701 piezoelectric acceleration sensor almost include the rotation speed of rotating machinery and its higher harmonics. High performance makes it applicable to rotating machinery and equipment in harsh industrial environments.
 

Technical Parameters

Electrical
1. Sensitivity: 10.2mV/m/s(100mV/g) ±5% (25℃, 80Hz)
2. Acceleration range: 50g
3. Amplitude linearity: ± 1%FS
4. Response frequency: 2.0-10KHz ( ±3.0dB)
5. Resonance frequency: 26KHz
6. Transverse sensitivity: 5%
7. Transmission distance: 305 meters long
8. DC bias voltage: 12V
9. Power supply voltage: 18-30Vdc
10. Power supply constant current: 2- 10mA
11. Electronic noise: 10μV rms (2Hz-20KHz)
12. Output impedance: <100ω
13. Grounding: Shell insulation, internal shielding

Environment
1. Operating temperature: -40℃~+80℃
2. Humidity: ≤99% (no condensation, no water immersion)
3. Protection class: IP67
4. Impact limit: 5000g peak

Physical
1. Weight: 100g
2. Shell material: Stainless steel
3. Output connector: MIL-C-5015, 2-pin (A, B end)
4. Pin A: Signal
5, Pin B: Common end
6. Mounting aperture: See Selection
7. Installation torque: 3N*m
8. Diameter: 0.75 inch (19mm)
9. Accessories: cable, installation conversion base, installation bolt

Ordering information
main part 1: Probe

 Order number

 description

 VMS701

 The sensor output connector is a 2-pin MIL socket

Note: The required options for the sensor include: [Main part 1: Probe, accessory 1: Connecting cable, accessory 2: mounting conversion base and accessory 3: mounting bolt].

Annex 1: Connecting cable

 Order number

 Cable length A

 Other B

 description

 VMS600901-Ax-Bxx

 Range:
  1m≤A≤300m, in
  increments of 0.5m, default 3m.

 For example: A2.5=Cable length is 2.5 meters.

 00: No requirement

 2-pin MIL-C-5015 plug, with xm 2-core shielded twisted wire cable, diameter 4mm, <120℃.

 VMS600801-Ax-Bxx

 2-pin MIL-C-5015 plug, with xm 2-core shielded twisted armored cable, diameter 8mm, <150℃.

 VMS600701-Ax-Bxx

 2-pin MIL-C-5015 plug (right angle), with xm 2-core shielded twisted wire armored cable, diameter 8mm, <150℃.

 VMS600601-Ax-Bxx

 2-pin MIL-C-5015 sealed plug, with xm 2-core shielded twisted wire cable, diameter 4mm, <120℃.

 

Attachment 2: Installing the conversion base (standard configuration)

 Order number

 description

 VMS600902

 Including 1/4-28UNF to M8×1 mounting bolts

 

Attachment 3: Mounting bolts

 Order number

 description

 VMS602103

 M6×1

 VMS602203

 M8×1

 VMS602303

 M10×1

 VMS602403

 M10×1.5 (default)

 VMS602503

 1/4-28UNF

Note: Installation bolt length: 9mm

Scan the QR code to read on your phone