application | Water turbine generator set, gear box, water pump |
VMS8000C/05 frame module |
Dimensions | 500mm × 271mm × 316mm ( L × H × D ) |
Hole Size | 467mm× 250mm |
Installation method | Disc |
VMS8000C/90 power module |
Input power | (1) 90~264VAC/47~63Hz (2) 120~370VDC |
display | Green OK light |
| | Provide power for the entire system and modules |
VMS8000C/02S system interface module |
Output impedance | 150Ω |
Key phase signal input | (1) Input impedance:> 20K Ω (2) Input frequency: <99,999 rpm (3) 1~255 pulses / cycle (4) Eddy current probe: ≥ 0.0167Hz (1rpm) 4 (5) Magnetic sensor: ≥ 3.3Hz (200rpm) |
LCD display | 4.3 inch TFT true color display |
Modbus communication | RS485: 1 , located on the back panel. |
VMS8000C/40-Axx Relay Module |
Number of Ways | 20 way |
Relay | Medium: epoxy resin, capacity: 2A/240VAC or 2A/24VDC , relay type: SPTD |
insulation | 1000VDC |
LED display | Alarm: red |
VMS8000C / 10 -Axx Eddy Current Module |
input signal | Receive 4 eddy current sensor signals |
input resistance | >20K Ω |
Frequency response | Radial vibration: (1) Frequency response: 4 ~ 4.0KHz ( 240 ~ 240,000rpm ) , ± 3dB (2) Accuracy: <± 1%FS @25 ℃ Swing (low frequency): (1) Frequency response: 0.5~100Hz ( 30~1,200rpm ), ± 3dB (2) Accuracy: <± 1%FS @25 ℃ |
Precision | <± 1%FS@25 ℃ |
4~20mA current | Large load 750 Ω, ± 0.1%FS@25 ℃ |
Buffered output | The front panel has a BNC original signal buffer output connector |
Output impedance | 150Ω |
Sensor power supply | -24VDC, current limit; current per channel is less than 50mA |
Call the | Alarm point setting: Each channel has two alarm points, which can be adjusted from 0 to 99% of full scale. |
LED display | (1) OK: green, on, off (2) BYPASS: Red |
VMS8000C / 20 -Axx vibration module |
Constant current source sensor power supply | Constant current source: 4.0mA@25 ℃ |
input signal | Accept 4 displacement, speed or acceleration sensor signals |
input resistance | >20K Ω |
Frequency response | (1) Acceleration: 4 ~ 4.0KHz ( 240 ~ 240,000rpm ) (2) Speed: 2~2.0KHz ( 120~120,000rpm ) |
Low frequency response | (1) Acceleration: 0.5~100.0Hz ( 30~6,000rpm ) (2) Speed: 0.5 ~ 100.0Hz ( 30 ~ 6,000rpm ) |
Precision | <± 1%FS@25 ℃ |
4~20mA current | Large load 750 Ω, ± 0.1%FS@25 ℃ |
Signal processing | (1) Peak ( peak ) / (2) Peak - peak (peak-peak) / (3) RMS |
Buffered output | The front panel has a BNC original signal buffer output connector |
Output impedance | 150Ω |
Call the | Alarm point setting: Each channel has two alarm points, which can be adjusted from 0 to 99% of full scale. |
LED display | (1) OK: green, on, off (2) BYPASS: Red |
VMS8000C / 50 -Axx Speed Module |
input signal | Eddy current sensor and magnetoresistive sensor |
input resistance | >20K Ω |
Precision | ± 1rpm |
4~20mA current | Large load 750 Ω, ± 0.1%FS@25 ℃ |
Buffered output | The front panel has a BNC original signal buffer output connector |
Call the | Alarm point setting: Each channel has two alarm points, which can be adjusted from 0 to 99% of full scale. |
LED display | (1) OK: green, on, off (2) BYPASS: Red |
Environmental indicators |
Operating temperature | -30℃~+65 ℃ |
Storage temperature | -40℃~+85 ℃ |
Relative humidity | Up to 90 %, non-condensing |
Order information |
Order number | Options |
Frame 8000C/05-Axx | 0 0 default |
Power module 8000C/90-Axx-Bxx | A: Power supply type (upper card slot) | 0 1 90~264VAC/47~63Hz 0 2 120~370VDC |
B: Power supply type (lower card slot) | 0 0 No power supply (when redundant power supply is not required) 0 1 90~264VAC/47~63Hz 0 2 120~370VDC |
Frame Interface Module 8000C /02S-Axx | A: System interface |
0 1 Ethernet TCP/IP0; 02 RS-485 Modbus RTU0; 03 2-way key phase input |
Eddy current module 8000C/10-Axx | A: I/O module type | 0 0 Standard I/O module |
Vibration module 8000C/20-Axx | A: Supporting sensor type |
0 1 Vibration speed sensor; 0 2 Piezoelectric speed sensor 0 3 Piezoelectric acceleration sensor; 0 4 Low frequency vibration sensor |
Speed module 8000C/50-Axx | A: I/O module type | 0 0 Standard I/O module |
Temperature monitoring module 8000C /30-Axx | A: I/O module type | 0 1 RTD 0 2 TC |
Overspeed monitoring system 8000C /53-Axx | A: Channel options | 0 3 Three-channel system |
Stroke monitoring module 8000C /60-Axx | A: I/O module type | 0 0 Standard I/O module |
Process monitoring module 8000C /62-Axx | A: I/O module type | 0 1 -10~+10Vdc 0 2 4~20mA |
Relay module 8000C /40-Axx | A: I/O module type | 0 0 Standard I/O module |