Welcome Customer !

Membership

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 振动显示仪表

Xwboo>Products
Product Categories

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.Free·1YRS

  • E-mail

    jl80283688@163.com

  • Phone

    +86-510-80283688,ext-8888/8021

  • Address

    5 shenjiabang, Yunting street, Jiangyin City

Contact Now

JL-W type of rail double layer vibration and noise reduction fasteners

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
JL-W type of rail double layer vibration and noise reduction fasteners
Product Details
Application:
 
The fastener is a bolt mounted ω type elastic rod fastener with small resistance. Its characteristic is using WJ-2 type of elastic rod, used for elevated roads, also can be equipped  with special rubber washer with small resistance. It mainly applies to metro railway transportation, which can reduce noise, vibration and other impact brought from subway to the surrounding urban environment.
 
Fastener structural characteristics:
 
The fastener mainly consists of rubber tie plate under the rail, vibration absorber and insulation buffer washer. The vibration absorber is the main part of the vibration and noise reduction fastener, it consists of upper and lower iron washers, middle rubber vibration absorption washer, nylon locking ring and so on, its unique advantage is the detachable structure, the middle rubber vibration absorption washer can be replaced, iron washer can be repeatedly used, which significantly reduced the maintenance and running costs of rail fastener.
 
Technical parameters:
 
1. The fastener applies to 60kg/m steel rails
 
2. Elastic rod types: WJ-2 type elastic rod
 
3. Static stiffness: 10~15KN/mm
 
4. Ratio of dynamic stiffness to static stiffness: ≤1.35
 
5.Height adjustment: 40mm
 
6. Railway gauge: single track -8~+10mm
 
7. External dimensions: 370mm×200mm
 
8. Anchor bolt hole spacing: 290mm×127mm
 
9. Application scope:  For area, elevated lines with higher requirements towards vibration and noise reduction
 
10. Vibration and noise reduction effect              Under the viaduct  Noise reduction >6dB(A)
 
 (Compared with WJ-2 type of fastener)    25m away from the road  Noise reduction >4dB(A)                           
 
                                                                      The viaduct surface vibration  Reduction >8dB(A)
 
11.   Fatigue test      Passed 3million times of cyclic fatigue tests in November  2015                      
 
Requirement towards static stiffness variation before and after fatigue is ≤10%
 
                                  Actual measurement is +4.6%~+6.9%
 
                     Railway gauge widening requirement is ≤4mm; actual measurement is +1.6mm
 
Additional instructions:
 
1. External dimensions of the iron washer and the location of anchor bolt hole can be determined according to users’ needs.
 
2. Railway gauge also can be determined according to users’ needs.
Scan the QR code to read on your phone