Welcome Customer !

Membership

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 振动显示仪表

Xwboo>Products
Product Categories

Jiangsu Jiangling Measurement & Control Technology Stock Co., Ltd.Free·1YRS

  • E-mail

    jl80283688@163.com

  • Phone

    +86-510-80283688,ext-8888/8021

  • Address

    5 shenjiabang, Yunting street, Jiangyin City

Contact Now

JM-B-2VT Dual Channel Vibration Monitor-Vibration Monitor

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
JM-B-2VT Dual Channel Vibration Monitor-Vibration Monitor
Product Details

I. Overview

The JM-B-2VT dual-channel vibration monitor is a new generation of intelligent products based on the integration of sensor technology, new signal processing technology, interrupt technology, and human-computer interaction technology. It adopts a dual-channel synchronous monitoring mode to effectively monitor the operating conditions of the equipment, and extract relevant data for characteristic parameters, unit status data, and complete unit failure early warning and alarm. It can establish a set of rigorous vibration monitoring, diagnosis and analysis system for the equipment, by continuously monitoring the important state parameters of the equipment operation, understanding the operation status of the equipment in time, providing important data for the pre-diagnosis of accident signs, and providing reliable operation of the equipment Protection.

2. Features

1. Industrial true color touch screen design, convenient and simple human-computer interaction

2. Realize multi-channel vibration data acquisition, control and display

3. Disc-type compact housing, easy to install

4. Suitable for long-term online monitoring, convenient and simple installation and debugging, no on-site maintenance   

5. Built-in new microprocessor design to achieve complete intelligence

6. Has strong anti-vibration and anti-interference capabilities, suitable for use in harsh environments

7. Wide voltage power supply design, in line with multi-national power supply standards

8. Rich output interface configuration, almost can realize data communication with external system

9. The measurement parameter setting is protected by a password

10. With rich parameter setting function

11. Application of USB interface design can realize real-time data storage and backup of measurement

Three, technical parameters

1. Display mode: 4.3 inch TFT true color touch screen, LED backlight

2. Measuring range: (1) Frequency response: 4~4KHz (shaft vibration)/10~1KHz (watt vibration)

    (2) Amplitude: arbitrarily set within 0~500μm (peak-peak); factory value: 0~200μm

                  (3) Intensity: arbitrarily set within 0~50.0mm/s (true effective value); factory value: 0~20.0mm/s

3. Measurement accuracy: ≤±1% FS

4. Output interface: (1) Current output: 4~20mA (load≤1KΩ)

    (2) Secondary switch output: 5A/30Vdc or 5A/250Vac SPST dry node

    (3) TDM buffer signal output: sensor original signal, output impedance 100Ω, large transmission distance 300 meters

    (4) Digital communication: RS485 communication, MODBUS RTU protocol (optional)

    (5) USB interface: support external U disk data storage and backup

5. Use environment: (1) Working temperature: -30~65℃; (2) Storage temperature: -45~85℃; (3) Relative humidity: ≤85%

8. Power supply voltage: AC85V~265V/50-400Hz or DC24V

9. Power consumption: ≤15W

10. Installation method: disc type

11. Dimensions: 138mm×106mm×140mm (length×width×depth)

12. Hole size: 125mm×99mm (length×width)

Four, ordering guide

Order number

Sensor selection A

Range selection B

Communication  C

Power supply  D

JM-B-2VT-

Dual channel vibration monitor

1: ZHJ-2 vibration speed sensor

2: CWY-DO-φ8mm eddy current sensor

3: ZHJ-2D piezoelectric speed sensor

4: ZHJ-2G piezoelectric acceleration sensor

5: ZHJ-3D low frequency vibration sensor

n: special requirements

0: arbitrarily set within the range of 0~50.0mm/s and 0~500µm

0: None

1: RS485 communication

0: AC220V

1: DC24V

 

Scan the QR code to read on your phone