LTC-LNG600 LNG loading skid is used for batch loading of LNG. LNG loading skid intergrats flowmeter/anti-static alarm controller/pressure transmitter/temperature transmitter/flowrate control valve/emergency shutoff valve/batch controller and pass all test and inspection. When the skid arrives at customer’s factory, it only need to be connected with energy/communication/ system and bolting
process description
The LNG loading skid includes the loading liquid pipeline, the vapor pipeline, the circulation pipeline, the discharge pipeline, the nitrogen line and the instrument air pipeline. Install mass flow meters, regulating valves, check valves, loading control valves, temperature and pressure transmitters, process manual valves, etc. on the liquid pipeline, install check valves, control valves, temperature and pressure transmitters, etc. on the vapor pipeline .
At the same time, install safety valves on the liquid pipeline and the vapor pipeline, and install a dedicated LNG batch controller on the outside of the skid-mounted rack. The batch controller is connected to all the control valves, temperature transmitters, pressure transmitters, flow meters, etc. in the Loading control system.
The batch controller is equipped with an electrostatic grounding controller and an emergency stop button. The grounding controller is equipped with an electrostatic clamp installed near the crane pipe. The electrostatic clamp must be reliably connected to the tank truck during loading to prevent static electricity from accumulating.
The control system is equipped with two operating computers, one is used for loading control, monitoring the operation of the loading system, data storage and alarm; the other is used for business management, mainly used for the input of customer information and loading volume, and the weighing scale is over tare. , Gross weight and data processing.
A set of TV electronic control system is installed in the operating room, which is mainly used for the management of the weighbridge. When the tank truck is loaded on the weighbridge, the operator observes whether the parking position of the tank truck is normal through the explosion-proof cameras on the front and rear sides of the weighbridge, and observes the license plate number of the tank for business System entry.
FUNCTION
1. Batch control function: After receiving the order to start loading, the LNG special batch controller (quantitative control instrument) installed on the skid will start according to the predetermined procedure, open the relevant valve, collect the flow of the flowmeter, and reach the scheduled loading When measuring, close the relevant valve according to the predetermined procedure.
2. Tank truck pre-cooling function: The temperature inside the LNG tank truck coming to the loading station may be normal. In order to load the truck safely, a low flow rate top spray must be used to reduce the temperature of the LNG entering the truck. When the internal temperature drops to close to minus 100 degrees, full flow bottom loading is carried out.
3. Flow control function: a flow regulating valve and mass flow meter are installed in the loading skid. When the tank car is pre-cooled and finished, the loading flow is controlled separately to meet the loading process and safety requirements.
4. Nitrogen purging function: Three nitrogen pressure regulators are installed in the loading skid, which are used for nitrogen purging of the loading crane pipe before and after loading, and for the nitrogen sealing and inspection of the loading crane pipe rotary joint leak.
5. Temperature and pressure alarm function; pressure transmitters and temperature transmitters are installed on the LNG pipeline and RG pipeline in the loading skid to monitor the temperature and pressure during the loading process. When the specified temperature and pressure are exceeded, The control system alarms.
6. Position detection function: a crane tube docking frame is installed in the loading skid, and an explosion-proof proximity switch is installed on the docking frame. After the loading is completed, the loading crane tube must be placed back on the docking frame to prevent accidental swinging and damage of the loading crane tube Nearby equipment or accidental damage to the crane tube.
7. Grounding monitoring function: An electrostatic grounding controller is installed in the loading skid. For the safety of loading, the grounding resistance is monitored during the loading process. When the grounding is not good, the system will alarm and cut off the loading control valve.
8. Pressure safety release function. Safety valves are installed in the liquid phase, gas phase and nitrogen lines in the loading skid. In the event of an accident, the pipeline pressure exceeds the design pressure, and the safety valve operates to ensure the safety of the equipment and instruments in the skid.
9. Lightning protection design: The communication lines, power supply lines and signal lines connected inside and outside the loading skid are equipped with lightning protection grids to prevent accidental lightning strikes from damaging the system.
10. Control and interlocking functions; the batch controller realizes the control of the automatic control valve in the skid according to the process requirements; collects the pressure transmitter, temperature transmitter, flowmeter, electrostatic grounding signal, valve position signal, and Centralized display on the batch controller, and realize internal signal interlock.
11. Communication function: The loading skid adopts the standard RS485/MODBUS communication standard, which can send the loading flow, temperature, pressure, valve position and static state to DCS in real time to meet the factory management requirements.