Welcome Customer !

Membership

COSCO(Lianyungang) Liquid Loading & Unloading Equipment Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 装卸设备

Xwboo>Products

COSCO(Lianyungang) Liquid Loading & Unloading Equipment Co.,Ltd.Free·1YRS

  • E-mail

    yu.qing1@coscoshipping.com

  • Phone

    +86-518-85916044/6024

  • Address

    South Yuzhou Rd.,Haizhou Economic Development Zone,Lianyungang,Jiangsu,222062,China

Contact Now

Break-away valve

Model
Nature of the Manufacturer
Other
Product Category
Valve
Place of Origin
City, Province
Overview
Break-away valve
Product Details

In the process of storage and transportation of oil and chemical media, the tank truck is connected with the pipeline equipment of the storage and transportation station to load/unload the media. When dangerous situations such as sudden fire and vehicle slippage threaten the safety of the tank truck and the on-site pipeline and equipment , Without disconnecting the connection between the tank truck and the pipeline, the tank truck can be directly allowed to leave the dangerous area, realizing rapid separation without medium leakage, and ensuring maximum safety.

The break-away valve of our company was recognized as a high-tech product by the Provincial Department of Science and Technology. In March 2020, the national standard "GB/T38520-2020 cryogenic break-away valve for marine use" compiled with reference to our company's patent (ZL.3) was officially released.

The installation position of the break-away valve in the crane pipe is shown in the figure. The break-away valve is installed in the middle of the vertical pipe of the TLA, and there is no need to install other special things on the TLA and the foundation.

--When the vehicle body is driven out of the safe area permitted by the operation, the break-away valve can be safely separated.

Half of the separated break-away valve remains on the foundation pipeline, and the other half is taken away from the safe area by the car following the half-cut pipe and joint.

--The installation position of the break-away valve in the ship hose is shown in the figure. The break-away valve is installed at the soft end of the ship

--When the hull drifts out of the safe area allowed by the operation, pull the break-away valve to safely separate the hull from the shore-based pipeline.

Half of the separated break-away valve remains on the foundation pipeline, and the other half falls into the water and is taken away from the safe area.

 

  

Main parameters of breaking bolt type break-away valve:

Nominal diameter: DN25~DN100

Nominal pressure: 150LB, 300LB

Design temperature:

Room temperature: -50 ~ 200℃

Ultra-low temperature: -196℃ ~ +60℃

Actual circulation area:

Reduced diameter: not less than the international standard for reducing diameter valves

Full diameter: not less than the actual flow area of the pipeline

Main parameters of rope pull type (loop) break-away valve:

Nominal diameter: DN25~DN100

Nominal pressure: 150LB, 300LB

Design temperature:

Room temperature: -50 ~ 200℃

Ultra-low temperature: -196℃ ~ +60℃

Actual circulation area:

Reduced diameter: not less than the international standard for reducing diameter valves

Full diameter: not less than the actual flow area of the pipeline

Main parameters of rope pull type (holding hoop) break-away valve:

Nominal diameter: DN25~DN250

Nominal pressure: 150LB, 300LB

Design temperature:

Room temperature: -50 ~ 200℃

Ultra-low temperature: -196℃ ~ +60℃

Actual circulation area:

Reduced diameter: not less than the international standard for reducing diameter valves

Full diameter: not less than the actual flow area of the pipeline


Similar Product Recommend