Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

DecanterWater treatment equipment parts and maintenance services

Model
Nature of the Manufacturer
Other
Product Category
Water treatment equipment parts and maintenance services
Place of Origin
City, Province
Overview
The decanter, also known as the decanter, is one of the most critical mechanical equipment in the SBR process. It can be divided into siphon decanter, rotary decanter, self-floating decanter, and mechanical decanter. Most widely used in China is rotary (a kind of mechanical decanter).
Product Details

1. Introduction to decanter

The decanter, also known as the decanter, is one of the most critical mechanical equipment in the SBR process. It can be divided into siphon decanter, rotary decanter, self-floating decanter, and mechanical decanter. Most widely used in China is rotary (a kind of mechanical decanter).

The decanter is a device used in the SBR process to regularly remove the clarified water. It has the function of decanting the clarified water from the surface of the static pool without stirring and sedimentation, ensuring the quality of the effluent.

2. the characteristics of the decanter

1. The decanting depth can be designed according to the technological requirements.

2. Using PLC program-controlled intelligent drive, the decanter will quickly move the decanter weir from the parking position to below the water surface after receiving the drainage command, drain the static supernatant, and drain it back and forth.

3. When the decanter reaches the lower water level, the liquid level switch placed at the lower water level issues a return command, and the decanter quickly rises to the initial parking position to complete a working cycle.

4. Within the specified load range of the weir, the liquid level under the weir will not be disturbed. The weir mouth is equipped with a float and a slag baffle to ensure the quality of the effluent.

5. The special design ensures that the gravity and buoyancy of the decanter are basically balanced, so that the driving power consumption is very low.

6. The decanter to the main drain pipe is a stainless steel rigid connection, which avoids the disadvantages of high failure rate, short life, and high maintenance work intensity caused by soft connection.

7. The entire decanter has a solid support, which can withstand various stresses during work.

3. the structure of the decanter

The decanter is composed of a decanting weir, branch pipe, main pipe, 360-rotation slewing support, sliding support, driving device, automatic control device, etc.

When working, under the action of the driving device, the high-water weir will move downwards in the downward shifting circle with the centerline of the swing branch at the bottom of the water generator as the axis. During this process, the supernatant in the seR reaction sleeve will flow in through the pen water augmentation port. The water branch pipe is discharged through the shrinking main pipe.

4.the scope of application of the decanter

It is suitable for the CASS, CAST, ICEAS, DAT-IAT process of SBR process to treat urban sewage and industrial wastewater. It is widely used in the treatment of industrial wastewater (waste liquid) in papermaking, alcohol, dyes, pesticides, leather, viscose, monosodium glutamate, sugar and other industries.

5.decanter design considerations

1. In the initial stage of decanting, since the drainage pipe is usually full of air, air resistance is likely to occur when the water is first entered, especially when the drainage pipe is designed with full flow or close to full flow, necessary exhaust measures should be taken.

2. Minimize mechanical friction components as much as possible to reduce the frequency of wearing parts and their replacement.

3. Consider the balance between buoyancy and gravity, so that the power consumption is small.

4. For decanting parts between gas and liquid phases, the material adaptability should be considered.

5. For different decanters, when considering the form of their water traps, attention should be paid to the design of the scum baffle to prevent scum from entering the decanting pipe.

6. When designing the water collector and drainage channel, try to maintain uniform water collection and small resistance as much as possible.

7. The buoyancy of a decanter that relies on constant buoyancy should always be greater than gravity during decanting, and there should be enough margin to avoid sinking during the decanting process.

8. When the decanter used has the possibility of sewage entering during the aeration stage, the sewage discharge measures should be considered before the decanting operation.

9. If there are higher requirements for the decanting speed, reliable measures must be taken to prevent the excessive speed from disturbing the sedimented sludge.

10. The structure and performance of different decanters are quite different. Some decanters limit the depth of decanting due to their own structural constraints.

11. In order to ensure the quality of the effluent water and the decanting amount per unit time, the reasonable decanting range, decanting speed and decanting time should be determined according to the process requirements during the design.

Similar Product Recommend