1. Brief introduction of low-speed agitator
The low-speed agitator is suitable for mixing and dispersing high-viscosity materials, and the low-speed stirring paddle fully agitates the materials to achieve sufficient and efficient dispersion of materials. It is equipped with frequency conversion speed control.
2. Composition of low-speed agitator
It is usually composed of a drive motor, a reducer, a coupling, a frame, a seal, a stirring shaft, and a stirrer. in:
1. The driving motors include: three-phase asynchronous motors, explosion-proof motors, frequency conversion motors, pneumatic motors, hydraulic motors, etc.
2. Reducers include: cycloidal pinwheel reducer, helical gear reducer, worm gear reducer, bevel gear reducer, parallel shaft reducer, belt pulley reducer, etc.
3. Sealing forms include: packing seal, mechanical seal, magnetic seal, etc.
3. Material of low-speed agitator
The materials for making the agitator are usually divided into: 45#, stainless steel 304, 316L, 904L, duplex steel 2205, 2507, 1.4529, carbon steel lining natural rubber, carbon steel lining PE, carbon steel lining PO, carbon steel lining PTFE, etc. . According to the characteristics of the material, select the appropriate material for production.
4. the scope of application of low-speed agitator
Low-speed agitator is suitable for coatings, dyes, pigments, paints, inks, adhesives, chemistry, pharmaceuticals, coatings, leather, cosmetics, paper, non-minerals, food, rubber and plastics, composite materials, insulating materials, magnetic materials, and other colors Processing equipment for liquid-solid-wet dispersion, grinding, stirring, homogenization, mixing, and dissolution of products in the chemical industry such as pulp.
5. the use of low-speed agitator matters needing attention
1. When the agitator is in use, first check whether the accessories of the instrument are complete, such as the agitator, power cord, etc., according to the instrument manual.
2. When adjusting the speed, the speed should be gradually adjusted from low speed to high speed, do not start directly at high speed, so as to avoid the agitator being out of synchronization and causing jitter.
3. It cannot be heated when it is not stirred, and the power supply should be cut off when it is not working.
4. The instrument should be kept clean and dry, especially do not let the solution enter the machine.
5. If you find that the stir bar beats or does not stir during stirring, please check whether the beaker is stable and the position is correct.
6. Medium-speed operation can prolong the service life of the agitator.
7. It can be connected to the ground wire when in use.