1. Introduction to buoy thruster
The buoy thruster is a low-speed, large-impeller product, mainly used for hydraulic circulation, the speed is generally lower than 60rpm, the flow rate is low, but the range of action is large.
2.the performance characteristics of the buoy thruster
1. The buoy thruster has compact structure, simple operation and maintenance, convenient installation and maintenance, and long service life.
2. The impeller has a reasonable hydraulic design structure and high working efficiency. The swept-back blade has a self-cleaning function to prevent entanglement and blockage of debris.
3. Mixed use with aeration system can greatly reduce energy consumption, increase oxygenation capacity significantly, and effectively prevent precipitation.
4. The insulation class of the motor winding is F, and the protection class is IP68. Imported bearings and motor anti-condensation devices are selected to make the motor work safer and more reliable.
5. Two mechanical seals, made of tungsten carbide, and all exposed fasteners are stainless steel.
3.the use of buoy thruster
The buoy thruster is a low-speed thrust mixer, which is suitable for aeration tanks and anaerobic tanks of industrial and urban sewage treatment plants. It produces strong water flow with low tangential flow, which can be used for water circulation and nitrification, denitrification and phosphorus removal in the pool. Stages create water flow and so on.
4. the precautions for the selection of the buoy thruster
The matching power required for the selection of the buoy thruster is determined according to the volume, the density, viscosity and the stirring depth of the stirred liquid. One or more mixers should be used according to the specific situation. To ensure reasonable results, the user is requested to provide the following information:
1. Purpose of use.
2. Pool type.
3. Pool size, including water depth.
4. Medium characteristics: including viscosity, density, temperature, solid content, etc.
5.Preparations for the start-up of the buoy thruster
1. Before starting the equipment, check whether the thruster is intact and whether there is a large amount of sludge deposits around the equipment, so as not to affect the normal operation of the equipment.
2. Check whether there is enough oil in the oil chamber, whether there is oil leakage and the sealing condition.
3. Whether the cable is damaged or broken, and whether the entrance of the cable is sealed.
4. If the motor or control box has been overhauled, check whether the overload protector set current is appropriate before starting, and perform a jog test to observe whether the operating direction of the float-type submerged low-speed thruster meets the requirements.
5. If the float-type submersible low-speed thruster stops for a period of time and does not run for a period of time, perform an insulation test on the motor before starting, and then do a jog test after confirming that it is normal, and observe the operating current of the thruster. If the current is too large, then Do not turn on the pump directly, otherwise it is easy to cause overload and damage the motor.