Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

GSHP Type Rotary Rake Grille Decontamination MachineTrash machine

Model
Nature of the Manufacturer
Other
Product Category
Trash machine
Place of Origin
City, Province
Overview
The GSHP type rotary rake grille decontamination machine is mainly composed of a driving device, a frame, a main shaft, a grid, a slag tray, a tooth rake and a traction chain. Driven by the motor, after being decelerated by the reducer, the sprocket and the chain are driven to move, and the decontamination tooth rake chain fixed on the rotating chain moves to the bottom behind the grid.
Product Details

1. Brief introduction of GSHP type rotary rake grille decontamination machine

The GSHP type rotary rake grille decontamination machine is mainly composed of a driving device, a frame, a main shaft, a grid, a slag tray, a tooth rake and a traction chain. Driven by the motor, after being decelerated by the reducer, the sprocket and the chain are driven to move, and the decontamination tooth rake chain fixed on the rotating chain moves to the bottom behind the grid.

After passing the guide wheel, it turns to the position facing the water surface in front of the grid, continues to move and inserts into the gap of the fixed grid to move upward, lifts the dirt intercepted in front of the grid to the surface of the water, and automatically flips along with the movement of the chain to the slag outlet. The dirt is self-unloaded into the conveyor or slag bucket behind the grid to complete the decontamination process, and the liquid flows through the grid gap of the grid, and the entire working state is continuously cycled.

2. Technical parameters of GSHP type rotary rake grille decontamination machine

 

GSHP type rotary rake grille decontamination machine

 

3. Main features of GSHP rotary rake grille decontamination machine

1. Since the grid of the rotary rake grille decontamination machine is placed in the middle position of the traction chain of the tooth harrow (other mechanical grids are placed under the traction chain), the movement direction of the tooth harrow during the cleaning process is changed (and The opposite is true for other grilles), to avoid getting hard objects into the bottom and jam the rakes and drag chains.

2. An overload safety protection device is installed on the sprocket at the output shaft end of the reducer to avoid damage to the equipment due to the overload surface due to accidents.

3. Because the rotary chain of the grille machine is equipped with multiple decontamination tooth rakes, the decontamination efficiency is high and the decontamination is thorough.

4. Compact structure, simple electrical control, easy to realize automation.

Fourth, the use of GSHP type rotary rake grille decontamination machine

The GSHP type rotary rake grille decontamination machine is used in the inlet channels (wells) of urban sewage treatment plants, water plants, rainwater pumping stations, etc., to automatically intercept and remove floating objects in the water to ensure the normal operation of the next process.

5. On-site installation and acceptance of GSHP type rotary rake grille decontamination machine

1. After the equipment arrives on site, our technical representative will be responsible for installation at the work site.

2. After all the equipment is installed, we will be responsible for operation debugging and on-site testing, as well as on-site training. After commissioning, the idling test of the cleaning machine shall not be less than 4 hours.

3. The test content and test results meet the technical requirements of the tender, and are approved by the buyer. The test record is handed over to the buyer. If the test result does not meet the requirements, we will replace it free of charge. On-site measurement tools are provided by us.

4. Nameplate and logo: The nameplate is fixed in an obvious position, and the specific content is as follows:

Equipment name, equipment model, main technical parameters, motor power, voltage level, factory date, factory serial number, etc. The nameplate is installed in a suitable and prominent position on the equipment.

5. Transportation and packaging: We guarantee that the equipment is firmly packed during transportation, and the anti-corrosion layer will not be damaged to ensure that the equipment reaches the place of delivery safely.

6. Consumables and special tools: We provide the necessary random consumables and special tools in the equipment, and list the names and quantities of the consumables according to the usage during the warranty period, and supply them according to this content.

Similar Product Recommend