1. Brief introduction of GSHZ rotary grille decontamination machine
GSHZ rotary grille decontamination machine has compact structure, simple electrical control, easy to realize automation, excellent corrosion resistance, low energy consumption, low noise, and the characteristics of continuous decontamination action, clean sewage discharge, and high separation efficiency.
2. Technical parameters of GSHZ rotary grille decontamination machine
According to the equipment width W0 grid machine: single-line GSHZ300-1400 type, parallel-line GSHZ1400-3000 type. The selection is determined by the amount of water passing and the lifting height, and different grids can be selected according to the size of the separated debris.
Note: When the channel width B>1600mm, parallel connection is used. At this time, one drive unit is used to bring two grids, and the effective grid width is B2-B-320
3. Features of GSHZ rotary grille decontamination machine
1. The structure is compact, the performance of the whole machine is good, the water flow area is large, and the operation is stable and reliable.
2. Simple operation, good cleaning effect, high efficiency and long life.
3. Convenient maintenance, no fixing screws for the underwater part of the grid.
4. The grid rotation cycle, slag removal, and decontamination work are fully automatically controlled.
5. With automatic, jog, emergency stop, cut-off and other control functions, it is convenient for operation and maintenance.
6. Each cleaning machine is equipped with a set of control box (indoor), all electrical components adopt domestic and foreign famous brand products, and PLC interface can be reserved according to user requirements.
7. With mechanical and electrical double overload protection device.
(1) Mechanical protection measures: There is a safety pin in the transmission sprocket, which can instantly cut off the safety pin under overload conditions to prevent damage to the transmission parts.
(2) Electrical protection: Overcurrent protection is provided in the electrical design to ensure that the motor can be effectively protected from burning out after the equipment fails.
8. The chain of the cleaning machine is made of stainless steel, and the small runner of the chain is also made of stainless steel. The underwater guide part of the chain adopts a slide way, and no lubricating oil is needed, so that the chain is not easy to be jammed by dirt.
9. The driving device is equipped with a protective cover, which not only meets the requirements of outdoor installation, but also facilitates inspection and maintenance.
10. A chain plate is set between the chain and the rake teeth to form a closed structure with the water blocking edge angle steel of the equipment, so that the tooth rake chain becomes a closed chain, thereby preventing garbage from entering the running track in the machine and preventing chain infarction and other failures.
Fourth, the use of GSHZ rotary grille decontamination machine
The GSHZ rotary grille decontamination machine is widely used in urban sewage treatment plants, water plants, pumping stations, and power plant water inlets to automatically intercept and remove floating objects in the water to ensure the normal operation of the next process. It can also be used in textile, printing and dyeing, slaughter, leather making, paper making, sugar making, wine making, and food processing.
5. Installation of GSHZ rotary grille decontamination machine
1. Inspection and preparation
Check the following before installing this equipment:
(1) Check whether the equipment is damaged during transportation.
(2) Check whether the basic size of the equipment is correct according to the equipment installation drawings and civil construction drawings.
(3) Check whether the dimensions are consistent with the embedded parts drawing. After checking the points, the equipment can be installed in place.
2. Equipment installation
(1) The equipment is installed as a whole, the support on the frame is aligned with the embedded steel plate on the ground, and then the support steel plate and the embedded part are welded into one body. If there is a gap at the bottom after the grille is installed, it can be sealed with cement Live fixed.
(2) If no embedded parts are placed, expansion bolts can be used to directly connect and fix the equipment support with the ground.
(3) The equipment should be installed horizontally and vertically with the ground.