Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

QSB Type Deep Water Self-Priming Submersible Jet AeratorAerator class

Model
Nature of the Manufacturer
Other
Product Category
Aerator class
Place of Origin
City, Province
Overview
The QSB type deep-water self-priming submersible jet aerator is composed of a submersible electric pump and a jet pump, so that water agitation and oxygenation can be carried out at the same time, which can not only obtain a higher oxygen absorption rate, but also has the advantage of no clogging of the impeller.
Product Details

1. Brief introduction of QSB type deep water self-priming submersible jet aerator

The QSB type deep-water self-priming submersible jet aerator is composed of a submersible electric pump and a jet pump, so that water agitation and oxygenation can be carried out at the same time, which can not only obtain a higher oxygen absorption rate, but also has the advantage of no clogging of the impeller.

2. Technical parameters of QSB deep-water self-priming submersible jet aerator

3. Material characteristics of QSB deep-water self-priming submersible jet aerator

1. The special aeration pump frame and pump casing are made of HT250 cast iron, which has certain corrosion resistance and can withstand the impact of a certain load.

2. The motor shaft of the aeration pump is made of 2cr13 corrosion-resistant materials, and measures have been taken to eliminate stress concentration in the structural design.

3. The mechanical seal of the special aeration pump can be made of silicon carbide/silicon carbide, tungsten carbide/tungsten carbide, silicon carbide/tungsten carbide according to the conditions of the pumping medium. The design service life of the mechanical seal is more than 12,000 hours.

4. The bearing of the aeration pump adopts NSK bearings, and its cumulative design operating life can be guaranteed to be more than 40,000 hours.

5. The static seal of the submersible jet aerator adopts Dingqing-70O ring.

6. All fasteners of the submersible jet aerator are made of stainless steel.

7. The material of the intake pipe of the submersible jet aerator is galvanized.

8. The nozzle material is cast iron.

4.the principle of QSB deep-water self-priming submersible jet aerator

The QSB type deep-water self-priming submersible jet aerator mainly uses the water flow generated by the submersible pump to pass through the nozzle to form a high-speed water flow, form a negative pressure around the nozzle to inhale air, mix with the water flow through the mixing chamber, and generate water vapor in the horn-shaped diffuser. The mixed flow is jetted out at high speed, and the water flow with many bubbles entrained in a large area and depth of water is swirled and stirred to complete aeration, and its shaft power does not change with the change of submerged depth, and the air intake volume can be adjusted.

5. Precautions for the use of QSB deep-water self-priming submersible jet aerator

1. It is forbidden to lift cables directly or use cables to lift other heavy objects when lifting the equipment. When carrying or hanging the diving aerator, a chain with a hook can be hooked on the shackle or the lifting ring of the upper cover.

2. The end of the cable is strictly prohibited to be immersed in water.

3. The shells of all equipment should be grounded reliably to prevent electric shock accidents.

4. Due to the working principle, the large immersion depth should not exceed the specified value.

5. The submersible aerator cannot be placed at the sewage inlet. When the chassis is placed on mud or floating sand, the submersible aerator will sink due to vibration. In this case, it is recommended to suspend or place the aerator. On a larger base plate.

6. When the temperature drops below 0°C, if the submersible aerator is still operating normally, it can be used continuously, otherwise it should be lifted and placed in a ventilated and dry place, and be protected from freezing.

Similar Product Recommend