Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

Sand Water SeparatorTransmission mud scraper

Model
Nature of the Manufacturer
Other
Product Category
Transmission mud scraper
Place of Origin
City, Province
Overview
The sand-water separator is the supporting equipment of the grit removal system, and its function is to separate the sand and water from the sand-water mixture discharged from the grit tank. The sand-water separator is the supporting equipment of the grit removal system, and its function is to separate the sand and water from the sand-water mixture discharged from the grit tank.
Product Details

1. Brief introduction of sand-water separator

The sand-water separator is the supporting equipment of the grit removal system, and its function is to separate the sand and water from the sand-water mixture discharged from the grit tank. The sand-water separator is the supporting equipment of the grit removal system, and its function is to separate the sand and water from the sand-water mixture discharged from the grit tank.

Second, the characteristics of sand-water separator

1. The separation efficiency can reach 96%~98%, and particles with a particle size of ≥0.2mm can be separated.

2. The shaftless screw is adopted, and the maintenance of the bearing without water is convenient.

3. Compact structure and light weight.

4. The key product of the new transmission device-the reducer is an advanced shaft-mounted type, which is convenient for installation and centering without a coupling.

5. The liner is a quick-installation type, which is easy to replace.

6. The axial position of the screw is adjustable, which is convenient to adjust the gap between the tail and the box wall.

3. Working principle of sand-water separator

The sand-water mixture is fed into the water tank from the top of the separator. The sand and gravel in the mixture are deposited on the bottom of the trough. Under the shaftless screw transportation, the gravel is lifted from the bottom of the U-shaped trough and pushed all the way. . The separated water is transported to the inlet tank.

Fourth, the installation precautions of the sand-water separator

1. The installation angle error of the equipment is minus 1 degree.

2. The equipment is not allowed to collide, and effective measures must be taken to protect the equipment from scratches or wear.

3. Check whether the engine oil is normal before starting up.

4. After confirming that all parts are correct, normal operation can be entered only after there is no friction.

5. When the sand-water separator is in operation, the protective cover must not be removed.

6. If the equipment fails, the equipment should be stopped immediately and the manufacturer should be notified for maintenance.

5. Daily maintenance of sand-water separator

1. Check whether there is noise, whether the seal is leaking, check the oil level, and increase it to the required height.

2. Regularly disassemble and clean, and replace worn parts and accessories.

3. After stopping the machine for more than 72 hours and then turning it on again, the machine should be flushed to remove the internal materials to dry up and agglomerate later.

Similar Product Recommend