Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

Submersible Self-Priming Jet Aerator QSB-3 OutletMixer class

Model
Nature of the Manufacturer
Other
Product Category
Mixer class
Place of Origin
City, Province
Overview
The QSB type submersible jet aerator passes through the nozzle to form a high-speed water flow through the water flow generated by the submersible sewage pump, forms a negative pressure around the nozzle to inhale air, mixes with the water flow through the mixing chamber, and produces a water-air mixed flow in the horn-shaped diffuser. The jetted water stream with many bubbles swirls and stirs in a larger area and depth of water to complete aeration, and its shaft power does not change with the change of submergenc......
Product Details

1. Export of submersible self-priming jet aerator QSB-3

The QSB type submersible jet aerator passes through the nozzle to form a high-speed water flow through the water flow generated by the submersible sewage pump, forms a negative pressure around the nozzle to inhale air, mixes with the water flow through the mixing chamber, and produces a water-air mixed flow in the horn-shaped diffuser. The jetted water stream with many bubbles swirls and stirs in a larger area and depth of water to complete aeration, and its shaft power does not change with the change of submergence depth, and the amount of air intake can be adjusted. Because of this, the submersible jet aerator can be used in pools where the water level changes greatly.

2. Outlet performance parameters of submersible self-priming jet aerator QSB-3

3. Export performance characteristics of submersible self-priming jet aerator QSB-3

1. The submersible jet aerator has a compact structure, a small footprint and easy installation.

The aerator is composed of three parts, a submersible sewage pump, aerator and air intake pipe, with compact structure and small floor space; in addition, the aerator provides two installation methods, which are convenient for installation and convenient for maintenance.

2. The submersible jet aerator has high aeration efficiency and a wide range of applications.

Due to its high-speed jet flow state, the liquid and gas are fully mixed, the oxygen absorption rate is high, and the power efficiency is high. Compared with traditional aeration tanks, the treatment efficiency is 3~4 times higher, the aeration time can be significantly shortened, and it is suitable for various sewage treatments, including push-flow aeration tanks, mixed aeration tanks, delayed aeration tanks, oxidation ditch, Oxidation pond and so on.

3. The submersible jet aerator has a simple system and high reliability.

No need for blower and other equipment, the system is simple, except for the suction port, the rest are submerged in water to run, with low noise. The aerator uses a special submersible sewage pump with cutting, which is efficient and non-blocking, the equipment is safe and reliable, and has a long service life.

4. The investment and operating cost of the submersible jet aerator is low.

Because the jet aerator is suitable for deeper aeration tanks, it has less floor space, simple system, saving investment costs, high treatment efficiency, and saving operating costs.

Four, submersible self-priming jet aerator QSB-3 outlet use conditions

The QSB deep-water self-priming submersible jet aerator can operate normally and continuously under the following conditions:

1. The temperature of the medium should not exceed 40°C.

2. The PH value of the medium is 5~9.

3. The density of the medium does not exceed 1150kg/m3.

Five, submersible self-priming jet aerator QSB-3 outlet installation and selection

When the company needs to assist in the selection, the user needs to provide relevant data such as pool type, medium characteristics, required air intake, diving depth, etc., so that our company can design and provide high-quality equipment to better meet the needs of users. QSB type deep water self-priming submersible jet aerator has two installation forms: auto-coupling and .

1. The auto-coupling installation is to fix the aerator device and the special base on the bottom of the pool, install the supporting block on the top of the pool, connect the two with the guide rail, and then slide the submersible pump and the specific bracket after the connection is made. To the outlet position of the base, it is automatically coupled and sealed by the weight of the pump. Auto-coupled installation does not require installation or maintenance personnel to enter the puddle to lift and install the electric pump.

2. The installation method is to install the deep-water self-priming submersible jet aerator at the bottom of the pool, relying on its own weight positioning, and has the characteristics of variable installation position, flexibility, and low cost.

Similar Product Recommend