Technical data: ( On the basis of 380v / 50Hz/3ph)
| | power | current | Impeller diameter | Impeller speed | thrust | weight |
| model | | | | | | |
kW | A | mm | r/min | N | kg |
hybrid series mixer | QJB0.85/8-260/3-740C | 0.85 | 3.2 | 260 | 740 | 165 | 65 |
QJB1.5/6-260/3-980C | 1.5 | 4 | 260 | 980 | 300 | 65 |
QJB2.2/8-320/3-740C | 2.2 | 5.9 | 320 | 740 | 320 | 70 |
QJB4/6-320/3-960C | 4 | 10.3 | 320 | 960 | 610 | 70 |
QJB1.5/8-400/3-740S | 1.5 | 5.4 | 400 | 740 | 600 | 70 |
QJB2.5/8-400/3-740S | 2.5 | 9 | 400 | 740 | 800 | 70 |
QJB4/12-620/3-480S | 4 | 14 | 620 | 480 | 1400 | 184 |
QJB4/6-400/3-980S | 4 | 12 | 400 | 980 | 1200 | 73 |
QJB5/12-620/3-480S | 5 | 18.2 | 620 | 480 | 1800 | 184 |
QJB7.5/12-620/3-480S | 7.5 | 27 | 620 | 480 | 2600 | 229 |
QJB10/12-620/3-480S | 10 | 32 | 620 | 480 | 3300 | 229 |
Low-speed push-flow mixer | QJB1.5/4-1100/2-85P | 1.5 | 4 | 1100 | 85 | 1800 | 170 |
QJB1.5/4-1400/2-36P | 1.5 | 4 | 1400 | 36 | 800 | 175 |
QJB1.5/4-1800/2-42P | 1.5 | 4 | 1800 | 42 | 1480 | 180 |
QJB2.2/4-1400/2-42P | 2.2 | 5.3 | 1400 | 42 | 900 | 180 |
QJB2.2/4-1800/2-42P | 2.2 | 5.3 | 1800 | 42 | 1100 | 185 |
QJB3/4-1100/2-115P | 3 | 7.2 | 1100 | 115 | 2200 | 180 |
QJB3/4-1400/2-56P | 3 | 7.2 | 1400 | 56 | 2000 | 185 |
QJB3/4-1800/2-56P | 3 | 7.2 | 1800 | 56 | 1800 | 190 |
QJB4/4-1400/2-56P | 4 | 9.2 | 1800 | 56 | 1700 | 170 |
QJB4/4-1800/2-63P | 4 | 9.2 | 1800 | 63 | 1800 | 190 |
QJB4/4-2500/2-42P | 4 | 9.2 | 2500 | 42 | 2900 | 210 |
QJB5/4-1800/2-63P | 5 | 11.9 | 2500 | 56 | 3100 | 240 |
QJB5/4-2500/2-56P | 5 | 11.9 | 2500 | 56 | 3100 | 240 |
QJB7.5/4-1800/2-63P | 7.5 | 15.2 | 2500 | 63 | 4250 | 280 |
QJB7.5/4-2500/2-63P | 7.5 | 15.2 | 2500 | 63 | 4250 | 280 |
Mixer model selection and calculation paper
Installation:
The mixer should be installed as deep as possible.
- If in one tank, 2 or more mixer installed, in order to have good stirring performance, each mix flow should be continuous to connect to others, and will not interaction each other.
- Distance between floor and blade's top edge should be more than 400mm,like below figure, HMIN>400mm. If lower than Hmin, the mix flow will hit the floor, and not stir the water, waste the energy.
- Distance between water level and blade's top edge should be minimum 1.5 times of blade diameter. Like below figure, HABOVE>1.5 times D ( impeller diameter) , If lower than Habove, the mix flow will hit above the water level, also waste the energy.
- Distance between wall and top blade should be at least 2 times of impeller diameter. Lmin > 2 times D ( impeller diameter) If lower than this distance, there maybe vibration, and easy damage the mixer.
QJB Submersible mixers and Installation System price table
num | model | price | | Install System Price |
with shroud | without shroud | model | water | Pond depth | water |
Q235-A | 304 | Q235-A | 304 | Q235-A | 304 | Q235-A | 304 |
1* | QJB0.75/8-260/3-740C/S | | | 3980 | 4170 | 1-1 | | | 3-≤4m | 840 | 1670 |
4-≤5m | 960 | 1790 |
5-≤6m | 1080 | 1910 |
1-2 | | | 6 m | 690 | 1180 |
1-3 | 390 | 580 | 3-≤4m | 1290 | 2410 |
4-≤5m | 1450 | 2710 |
5-≤6m | 1610 | 3010 |
2 | QJB0.85/8-260/3-740C/S* | 4505 | | 4060 | | 1-1 | 525 | 1260 | 3-≤4m | 1330 | 3350 |
4-≤5m | 1490 | 3760 |
5-≤6m | 1660 | 4185 |
1-2 | | | 6 m | 1165 | 2760 |
2-1 | QJB0.85/8-260/3-740C/S | | 4820 | | 4240 | 1-1 | 525 | 1260 | 3-≤4m | 1330 | 3350 |
4-≤5m | 1490 | 3760 |
5-≤6m | 1660 | 4185 |
1-2 | | | 6 m | 1165 | 2760 |
num | model | price | price | Install Systemprice |
with shroud | without shroud | model | water | Pond depth | underwater |
Q235-A | 304 | Q235-A | 304 | Q235-A | 304 | Q235-A | 304 |
3* | QJB1.5/6-260/3-960C/S | | | 4030 | 4220 | 1-1 | | | 3-≤4m | 840 | 1670 |
4-≤5m | 960 | 1790 |
5-≤6m | 1080 | 1910 |
1-2 | | | 6 m | 695 | 1435 |
1-3 | 390 | 580 | 3-≤4m | 1290 | 2410 |
4-≤5m | 1450 | 2710 |
5-≤6m | 1610 | 3010 |
4 | QJB1.5/6-260/3-980C/S* | 4240 | | 3780 | | 1-1 | 525 | 1260 | 3-≤4m | 1330 | 3350 |
4-≤5m | 1490 | 3760 |
5-≤6m | 1660 | 4185 |
1-2 | | | 6 m | 1165 | 2760 |
4-1 | QJB1.5/6-260/3-980C/S | | 4505 | | 3965 | 1-1 | 525 | 1260 | 3-≤4m | 1330 | 3350 |
4-≤5m | 1490 | 3760 |
5-≤6m | 1660 | 4185 |
1-2 | | | 6 m | 1165 | 2760 |
5 | QJB2.2/8-320/3-740C/S* | 5900 | | 5445 | | Ⅱ | 715 | 1785 | 3-≤4m | 2020 | 4720 |
4-≤5m | 2270 | 5310 |
5-≤6m | 2520 | 5905 |
5-1 | QJB2.2/8-320/3-740C/S | | 6395 | | 5805 | Ⅱ | 715 | 1785 | 3-≤4m | 2020 | 4720 |
4-≤5m | 2270 | 5310 |
5-≤6m | 2520 | 5905 |
num | model | price | price | Install Systemprice |
with shroud | without shroud | model | water | Pond depth | underwater |
Q235-A | 304 | Q235-A | 304 | Q235-A | 304 | Q235-A | 304 |
6 | QJB4/6-320/3-980C/S* | 5950 | | 5500 | | Ⅱ | 715 | 1785 | 3-≤4m | 2020 | 4720 |
4-≤5m | 2270 | 5310 |
5-≤6m | 2520 | 5905 |
6-1 | QJB4/6-320/3-980C/S | | 6540 | | 5855 | Ⅱ | 715 | 1785 | 3-≤4m | 2020 | 4720 |
4-≤5m | 2270 | 5310 |
5-≤6m | 2520 | 5905 |
7* | QJB0.37/6-220/3-960/S | | | | 3980 | 1-1 | | | 3-≤4m | 840 | 1670 |
4-≤5m | 960 | 1790 |
5-≤6m | 1080 | 1910 |
1-2 | | | 6 m | 695 | 1435 |
1-3 | 390 | 580 | 3-≤4m | 1290 | 2410 |
4-≤5m | 1450 | 2710 |
5-≤6m | 1610 | 3010 |
8* | QJB0.55/6-220/3-960/S | | | | 4080 | 1-1 | | | 3-≤4m | 840 | 1670 |
4-≤5m | 960 | 1790 |
5-≤6m | 1080 | 1910 |
1-2 | | | 6 m | 695 | 1435 |
1-3 | 390 | 580 | 3-≤4m | 1290 | 2410 |
4-≤5m | 1450 | 2710 |
5-≤6m | 1610 | 3010 |
num | model | price | price | Install Systemprice |
with shroud | without shroud | model | water | Pond depth | underwater |
Q235-A | 304 | Q235-A | 304 | Q235-A | 304 | Q235-A | 
|
9 | QJB1.5/8-400/3-740/S | | 8295 | | 7490 | Ⅱ | 715 | 1785 | 3-≤4m | 2020 |
4-≤5m | 2270 |
5-≤6m | 2520 |
10 | QJB2.5/8-400/3-740/S | | 8630 | | 7780 | Ⅱ | 715 | 1785 | 3-≤4m | 2020 |
4-≤5m | 2270 |
5-≤6m | 2520 |
11 | QJB3/8-400/3-740/S | | 8730 | | 7885 | Ⅱ | 715 | 1785 | 3-≤4m | 2020 |
4-≤5m | 2270 |
5-≤6m | 2520 |
12 | QJB4/6-400/3-980/S | | 8825 | | 7980 | Ⅱ | 715 | 1785 | 3-≤4m | 2020 |
4-≤5m | 2270 |
5-≤6m | 2520 |
13 | QJB4/12-620/3-480/S | | 17290 | | 15485 | Ⅲ -1 | 1660 | 4285 | 3-≤4m | 2560 |
4-≤5m | 2880 |
5-≤6m | 3205 |
14 | QJB5/12-620/3-480/S | | 17575 | | 15675 | Ⅲ -1 | 1660 | 4285 | 3-≤4m | 2560 |
4-≤5m | 2880 |
5-≤6m | 3205 |
num | model | price | price | Install Systemprice |
with shroud | without shroud | model | water | Pond depth | underwater |
Q235-A | 304 | Q235-A | 304 | Q235-A | 304 | Q235-A | 
|
15 | QJB7.5/12-620/3-480/S | | 22420 | | 20045 | Ⅲ -2 | 1820 | 4955 | 3-≤4m | 2560 |
4-≤5m | 2880 |
5-≤6m | 3205 |
16 | QJB10/12-620/3-480/S | | 23180 | | 20995 | Ⅲ -2 | 1820 | 4955 | 3-≤4m | 2560 |
4-≤5m | 2880 |
5-≤6m | 3205 |
17 | QJB12/12-700/3-480/S | | 24415 | | 22135 | Ⅲ -2 | 1820 | 4955 | 3-≤4m | 2560 |
4-≤5m | 2880 |
5-≤6m | 3205 |
18 | QJB15/12-620/3-480/S | | 29450 | | 26505 | Ⅲ -3 | 1945 | 5235 | 3-≤4m | 2640 |
4-≤5m | 2970 |
5-≤6m | 3300 |
19 | QJB18.5/12-620/3-480/S | | 31350 | | 28405 | Ⅲ -3 | 1945 | 5235 | 3-≤4m | 2640 |
4-≤5m | 2970 |
5-≤6m | 3300 |
20 | QJB22/12-620/3-480/S | | 32205 | | 29450 | Ⅲ -3 | 1945 | 5235 | 3-≤4m | 2640 |
4-≤5m | 2970 |
5-≤6m | 3300 |
Notes:
1. QJB0.75/8, 1.5/6 two specifications, the impeller is divided into cast iron and 304 material, other parts are made of cast iron and carbon steel.
2. QJB0.37/6, 0.55/6 two specifications, parts material: the same as 1.5/8 to 22/12 The material of the mixers of each specification is 304.
3. 1-1, 1-3 are guide rod type installation. 1-1 does not need to be equipped with a hand hoist. 1-3 price does not include hand hoist (wire rope type), if you need to configure its price: 300 yuan / piece.
4. 1-2 are floor mounted (pool bottom) installations with a Pond depth of 6 m.
5.Among the four models of QJB0.85/8, 1.5/6, 2.2/8, and 4/6, the materials marked with * are cast iron and carbon steel, and the material of 304 without * mark means the impeller is 304 casting , other materials with configurations marked with *.
6.Guide rod lengthening: Ⅰ-1: 120 yuan/m (Q235), 360 yuan/m (304). I-3: RMB 120/m (Q235), RMB 330/m (304). II: 147 yuan/m (Q235), 409 yuan/m (304). Additional bracket: Ⅱ: 300 yuan / piece (Q235), 515 yuan / piece (304). Ⅲ -1.-2.-3: 245 yuan/m (Q235), 755 yuan/m (304). 7.Additional brackets: Ⅲ-1.-2.-3: RMB 300/piece (Q235), RMB 515/piece (304).
7.The price of the lifting device does not include manual hoist. If you need to configure it, the price is 450 yuan / piece.
8.Hoist chain extension for lifting: 45 yuan/m (Q235), 70 yuan/m (304).
9.Wire rope extension for lifting: 15 yuan /m (304).
10.Single purchase of lifting columns: Ⅰ -1: 545 yuan/m (Q235), 1290 yuan/m (304). II: RMB 680/m (Q235), RMB 1,710/m (304). Ⅲ -1.-2.-3: 970 yuan/m (Q235), 2660 yuan/m (304).