Brand: Weike Environmental Protection
Model: Complete
Specification: can be customized
Weight: 200kg
Motor power: 1.5kW
Processing capacity range per time: 100L
Speed range: 115r/min
Dimensions: 1100mm
Mixing accessory form: wall-mounted
Advantages of anaerobic pool low-speed pusher
1. Exquisite appearance, high efficiency and energy saving: all stainless steel shell. It is durable and does not rust, and the appearance is exquisite and tall.
2. A new generation of mechanical seals: Mechanical seals are easily consumed parts in water pumps. We continue to work hard to make mechanical seals durable.
3. Good wire, acid and flame retardant: high corrosion resistance, aging resistance, high temperature freezing resistance, no obvious change in the insulation layer after strong stretching.
Conditions for the use of low-speed thrusters in anaerobic tanks
1. Control the separation of concentrated sludge: the temperature of the medium shall not exceed 40°C.
2. Acid-base neutralization and pH adjustment process: the pH of the medium is about 5-9.
3. Prevent the condensation and precipitation of particles on the pool wall and bottom: the density of the medium should not exceed 1150Kg/m3.
4. Improve heat exchange efficiency: The system has long-term diving operations, and the diving depth generally does not exceed 20M.
5. Other places where two-phase or three-phase must be kept inseparable.
Precautions for the installation of low-speed flow thruster in anaerobic tank
1. The guide rod or wire of the low-speed thruster of the anaerobic tank should be perpendicular to the horizontal plane, and a plumb hammer can be used for correction.
2. When the hook is lifted from the submersible mixer, the end of the impeller should rise 5°-10° from the horizontal
3. The anaerobic tank low-speed thruster adjusts the chain on the lifting device. When it slides the guide rod or wire down, the hook of the equipment and the lifting center of gravity of the equipment should be on the same vertical line.