Brand: Weike Environmental Protection
Model: Complete
Specification: can be customized
Pump body material: cast iron
Motor power: 0.85KW
Impeller speed: 740/960r/min
Diameter: 260-790mm
Water thrust: 260N
Maximum turning angle: -60°~+60°
Installation method: fixed (movable steering type)
Advantages of small low-speed pusher
1. The high-speed motor has strong power: intelligent processing and casting, stable operation, and moisture-proof and rust-proof surface treatment.
2. All copper wire motor: the super power adopts all copper wire, high temperature resistance, longer service life, stable and reliable.
3. High-precision rotor: no noise, stable and reliable, sufficient power, long service life, no noise, suitable for high-speed operation.
4. Propeller type: stainless steel 304 impeller, made of stainless steel 304 material, thickened and sharp impeller, impeller is optimized design, high efficiency, swept-back blade has self-cleaning function, can prevent sediment blockage.
Product details of small low-speed thruster
1. High temperature resistant mechanical seal: long service life, wear-resistant and durable bearing.
2. Good oxygen resistance and aging resistance: corrosion resistance, mechanical seal ring.
3. Motor protection cover to protect the safety of the motor: it is not damaged, and the use of silicone seals is more assured.
4. Probes with water leakage, leakage and over-temperature protection: need to be equipped with a professional control cabinet (if you need to install a 7-core cable, please contact customer service) 7-core wire.
Precautions for small low-speed pusher
1. The guide rod or guide wire should be perpendicular to the horizontal plane and can be corrected with a plumb hammer.
2. When lifting the hook from the submersible mixer, the end of the impeller should be inclined upward relative to the horizontal plane.
3. Through the lifting device. The adjustment of the chain on the submersible mixer makes the hook and the lifting center of gravity of the submersible mixer lie in the same vertical line during the process of sliding down the guide rod or guide wire.