Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

Rotary Grille Decontamination Machine

Model
Nature of the Manufacturer
Other
Product Category
Trash machine
Place of Origin
City, Province
Overview
The rotary grille decontamination machine is a special equipment for water treatment that can continuously and automatically intercept and remove various shapes of debris in the fluid. It is assembled into a set of rotary grille chains by a unique rake tooth factory. Driven by the motor reducer, the rake tooth chain rotates against the direction of the water flow.
Product Details

1. Brief introduction of rotary grille decontamination machine

The rotary grille decontamination machine is a special equipment for water treatment that can continuously and automatically intercept and remove various shapes of debris in the fluid. It is assembled into a set of rotary grille chains by a unique rake tooth factory. Driven by the motor reducer, the rake tooth chain rotates against the direction of the water flow.

2. the specifications of the rotary grille decontamination machine

 

 

3.the advantages of rotary grille decontamination machine

1. No permanent immersion parts, strong corrosion resistance and long service life.

2. The whole machine has a compact structure and is easy to repair and maintain.

3. The whole machine has low energy consumption, convenient operation and control, and can realize complete automation.

4. The slag removing tooth harrow directly discharges the dirt to the collection place during use, with high decontamination efficiency and no slag falling phenomenon.

5. The opening and closing of the slag cleaning tooth harrow is controlled by a hydraulic system, with stable performance, simple structure, safe and reliable.

6. The open structure makes the working platform clean and the working environment is good.

7. It has a wide range of applications, especially suitable for multi-channel or wide-channel water intake grille slag condition.

4.the scope of use of the rotary grille decontamination machine

1. At the water inlet of the water intake point of the water supply plant.

2. At the cooling water inlet of the power plant.

3. Screening of raw wool scouring and backwashing.

4. Screening of debris in municipal pipe channels.

5. Pre-screening of sewage treatment in cities and communities.

6. Pre-screening of textile printing and dyeing wastewater, chemical wastewater, slaughter wastewater, fur tanning wastewater, and papermaking wastewater treatment to prevent the water pump from being blocked.

7. Separation of waste residues from brewing, sugar extraction, and bean food processing plants.

8. It can be used as water washing or residue separation equipment in fruit, aquatic, and grain processing technology.

5. Equipment operation of rotary grille decontamination machine

1. A full-time electrician is responsible for connecting the power supply.

2. After turning on the power, turn the power switch first to observe whether the running direction of the rake teeth of the equipment is consistent with the direction shown by the arrow of the safety cover. If it does not match, the power should be cut off and adjusted immediately.

3. When starting operation, first check that the circuit, instrument and button of the electric control phase are in normal state, and then place the power switch in the "start" position, and the rake can be operated by manual or automatic control.

4. After the power is turned on, perform a no-load test run. First, click, manually switch, and observe the grid. There should be no jitter, jamming or abnormal noise. If there is any abnormal phenomenon, it should be shut down for inspection and eliminated.

5. When the equipment is operating normally, the power switch can be switched to the automatic operation state.

6. Generally, the appropriate start-stop time should be determined according to the amount of dirt passing through the pumping station (such as 5min to open, 30min to stop), once it is determined, the machine will be in an automatic state.

Similar Product Recommend