1. Brief introduction of crushing grille decontamination machine
The crushed grille decontamination machine consists of wet and dry motors, gearboxes, side plates, drive shafts, cutting blades, vertical drums, seals, mounting brackets, overflow grilles, diving cables, electrical control boxes, and spares. It is composed of artificial grids and other components.
2. the characteristics of crushing grid decontamination machine
1. Integral design, compact and beautiful appearance.
2. Flexible structure and installation options, suitable for channels of various sizes.
3. It adopts low-speed operation, low wear rate, low power consumption, and adopts the principle of dual-axis differential speed to achieve strong, squeezing and crushing.
4. Special structure design, with strong self-cleaning ability, no entanglement and accumulation of debris.
5. Stable head loss ensures the stability of upstream and downstream water depth.
6. The special transmission structure makes it easy to replace the wearing parts such as blades, easy to maintain, and reduces the maintenance cost.
7. The high-strength alloy or stainless steel cutter head ensures the high efficiency and reliability of the equipment.
8. Optimized design to ensure extremely high efficiency and low energy consumption.
9. Reliable protection system. When the equipment is overloaded, it can automatically realize reverse unloading. If it can't be eliminated after three retries, it will stop and alarm.
10. Amphibious motor, amphibious. The motor can not only operate normally indoors and outdoors, but also can adapt to the diving use of the motor when the water level suddenly rises.
11. Auto-coupling installation, convenient for maintenance. The grille works underground and adopts automatic coupling installation, no large lifting equipment is required. During maintenance, all the equipment can be lifted out of the pool for maintenance.
12. Less floor space, less overall investment, all equipment is buried in the ground, small in size, light in weight, no need to build a pump house, and low civil construction costs.
3. the working principle of the crushing grid decontamination machine
After the motor is started, the blades and the vertical drum rotate at different speeds at the same time. The floating solids in the sewage enter the drum area and are intercepted by the rotating grid and sent to the cutting area. Two groups of blades rotating at different speeds Perform axial and radial cuts quickly.
It is crushed into small particles of 8-10mm, and the crushed small particles are pumped by the water pump to flow away, effectively preventing the water pump from being entangled and blocked. The auxiliary grille performs auxiliary dirt interception when the water level is super high.
4.the main purpose of crushing grille decontamination machine
1. Used in underground pumping station, water inlet pipe network, etc.
2. Used in conjunction with traditional grille for garbage disposal.
3. Used in sedimentation tank, digestion tank, sludge dewatering system.
4. Sewage collection system.
5. Inlet filtration of water intake project.
6. Entrance project of diversion channel.
5.common faults of crushing grille decontamination machine
1. There is noise or vibration during operation.
This situation is usually caused by the following aspects. The crushing grid is unstable or the nut is loose, the water inlet state is unstable, and the grid is blocked by impurities. The solution is to strengthen the foundation, check and adjust the water inflow status, and remove debris.
2. The grid cannot be started or the fuse is blown.
This situation is usually caused by winding, joint or cable open circuit, grid blockage, water leakage, etc. In this case, check the circuit and remove impurities.
3. The circuit breaker is automatically disconnected after the grid is started.
This situation is generally caused by too high or too low voltage, confusion of motor wire connectors, or failure of the control cabinet. The solution is to install the transformer to adjust the voltage, wire the connector, thicken the power cord and check and replace the electrical components.